Search results for query: *

  1. ValerianMagnum

    Carb help * the famous debate and 2x different cars

    Ok !! So my 380hp ( 400hp/440 tq ) crate duster's holley is shot ( 650 cfm : 4777 ) d.pumper , and im looking for another one...a 750 cfm dp would be better i think ? , So i bought a 750 cfm edelbrock for my stock 5.9 magnum ( 300hp/400 tq ) that goes in the big 68 fury , should i put a 4160...
  2. ValerianMagnum

    2024 Summit promo code ´help

    ordering new components for the new 360 that im putting in my 68 fury , does somebody knows if its possible to have a Promo Code , for summit , never did that but i think it wll help me since my budget is very tight ! thank you
  3. ValerianMagnum

    Different racing setups "Abodies"

    I tought that it was impossible beside the oval track racing cars.... ive found some 2bbl dusters and barracuda with 318s and 2bbls , i was quite surprised , lots of chevys of course but its fun to see that you can run with à tint 318 and à 2bbl and have respectable set ups ! Any of you guys saw...
  4. ValerianMagnum

    318 with 360 heads milling : small valves

    I have the 318 in my fury ( 71 engine ) and i have a 77 360 on a stand , i was thinking of milling the heads ( 360 ) to put on the 318 to help me out with the choice of big ports 340/360 aluminium intakes... will it bump up the compression to 8-9ishhh compare of loosing some ( 7-ishh ) thx guys...
  5. ValerianMagnum

    David Vizard s rods grinding mods etc ?

    What do you guys think of David vizard s mods on the 318 ( mission impossible ) rods grinding and all ? He as a tons of little tricks for a 318 and small Blocks , Wonder if it needs to be balanced ? Very Interesting things
  6. ValerianMagnum

    Pics of stock eliminator 318 ?

    Anyone has pics of 318 stock eliminators?
  7. ValerianMagnum

    Prestone that leaks behind the engine ?

    My little 318 is loosing prestone behind the engine...and it finishes its run were the bellhousing of the tranny is...leaks right in the Middle of the trans and drips on the floor... but its nowhere on the v shape of the block..no freeze plug its litteraly in the back , all the way behind the...
  8. ValerianMagnum

    Honestly...how good was the 318...mpg / durability / hp

    ...bla bla bla...but my big 68 fury as a 1971 318 from a scamp and i freakin love this thing , 727 and 2.76 suregrip rear end , runs a New china *Carter* 2bbl , New belts , not even a tune up was done after her first start in 22 years , this 318 purrred like like a kitten after New carb /...
  9. ValerianMagnum

    My 68 fury III , ratty survivor , pics and update :)

    Hi guys ! New pics of my ratty 68 fury , the car that didnt run for 22 years.. Left for dead and back on the road now ! 6th-7th ride with it? Goes very good , New brakes , tires, carb ,tune up , electrical repairs , New exhaust and muffler , starter etc : plans are to make it perfect as...
  10. ValerianMagnum

    [FOR SALE] Rare 318 streetmaster 4bbl intake

    318 streetmaster intake , rare piece from 1973 , all original and never been ported Perfect for a 273 318 or even a 360 with small valves , single plane intake / aluminium , im asking $ 200 usd , shipping included. Located in Montréal canada so i have to ship it , i have paypal, thx for watching
  11. ValerianMagnum

    Im just a dreamer : 440 vs 360 magnum

    hi guys ! Since i am a dreamer and i admit it !!! Ahahahahah, i bought a 1978 440 from a motorhome , it as 40 000 miles, the engine is complete and i have a stock 360 magnum with the 380hp components, i have the roller cam from the 380hp crate and dual plane intake bla bla bla , i did the 380hp...
  12. ValerianMagnum

    New cam for my 318 : 68 Fury "Kristine"

    Will do some test with my flat tappet 318 ( 1971 year ) that is in my 68 fury III , ill run a modified 2bbl intake and run another 4bbl intake and 4bbl carb , Guy lost the cam card but its the only specs i have , bought it for cheap , with a double timing chain : i believe its a elgin or old...
  13. ValerianMagnum

    Need help for 1st Cam break in :

    Hi guys , its been 21 years im in the hobbie but the cars that i drove always had the engine rebuild or were roller cams ( magnums ) i never did a break in myself , my young cousin bought a 360 from me and a 69 valiant project, we want to do stock 360 flat tappet camshaft break in, ive read all...
  14. ValerianMagnum

    Finally my 68 Fury is out of the snow ! 2nd life soon :)

    ...need love rolled for as it did at the time with more than 124,000 miles on the dash, 1968 Plymouth Fury 3, 318 v8, 5.2 liters, 230 hp / 340 torque: *** Of course it is not the most sought after of antique cars but this luxury muscle car (XL) is not a model that we see every day, it's very...
  15. ValerianMagnum

    Ported LD4B :(

    ...of other parts / engine gaskets / copy of an edelbrock air gap / 650 dp carb / 5.9 magnum exhaust manifolds/ dual exhaust set up .............* My big Question is unfortunately the LD4B is massively ported to the 340/360 gaskets , i didnt know and the ex owner didnt know either, it was to...
  16. ValerianMagnum

    Ok old timers , i need your knowledge on this cam ! Direct connection camshaft

    Okay !!! So since im an eternal dreamer , and slowly building a copy of my 380hp / 360 crate for my next car ( whatever it will be ) i am getting my big boat very soon ( 68 fury 3 fast top 318 ) i was offered a old , direct connection cam / Quite a bit aggressive for the street , in my opinion ...
  17. ValerianMagnum

    Could this idea work ? Did other guys did this ? 318 infos

    ...s pocket porting . I like the idea of running small ports and small valves and maybe even a 360 2bbl cam , or 340 cam to help the teener , **with dual exhaust , tuned carb , cold air system , electronic ignition , backfaced valves , windage tray and maybe 340 valves springs replacementi want...
  18. ValerianMagnum

    So...in 2023 do people still build hyd flat tappet engines * no rollers

    ...and cams , must still be a brand like melling or oem lifters that can have some quality like they use ? Your opinions and tips are welcome , ***** btw i am collecting parts bit by bit for the new spare engine , and i see that some people on ebay say that their lifters wont be problematic and...
  19. ValerianMagnum

    My way of a mission impossible 318 budget :)

    ...to convert the 2bbl to a 4bbl , i have tons of magnum manifolds laying around , i want to clean and port the intak and heads...but a big BUT ***** i want to order a cam , AND its like 700$ canadian for a cam kit , is there any cheaper way to have a good 450-480ishh cam and to run with a...
  20. ValerianMagnum

    Ok fellas...318 help needed , Mpg , reliability and enough power ***for a big boat !!!

    ..., performance and at least a bit of economy , not swapping to a big block ahahahah , what would be your set up if it was yours ? Thats the big question to answer !!! *** i have a 5.2 and a 5.9 magnum in the corner of my storage unit..but would love to leave this old LA in there and work it out
  21. ValerianMagnum

    Not a A...but a C-bodie , always beem a A-bodie guy; worth it ?

    ...318 230hp v8 , 2 door...hes asking 2k But will let it go for 1500$ , heard that theres no parts for the body , is it worth it ? The price is very cheap if you ask me , but from driving a duster to a 68 fury ? Must be pretty different ! * interior looks nice, sorry for the snow ( not the best...
  22. ValerianMagnum

    Bought a duster shell , vin # is on a blacklist , now what ?

    Hi guys , bought an old duster shell that i had a couple of years ago , flipped it and bought it back , the car is all appart and in pieces, as good parts for my 69 valiant , but anyway the vin # is on a blacklist on internet , someone put the vin on sale on ebay a couple of years ago , tought...
  23. ValerianMagnum

    duster 727 update and help needed

    hi Guys , new trans works ok in 1st , wheels are turning but the 3rd manual 'stick-shift'and reverse gear is not working when we put the gears into them ...what can it be ? 727 with red clutches and new stall converter , kickdown system , not reverse valve body
  24. ValerianMagnum

    New torque/ did we screw up ? 360 magnum

    ..., we knocked out the stall 's weight to make it neutral , : thats what i always heard and saw + wondering is all my 904 kickdown rods will fit my new 727 ? * i told my friend to remove the weight on the side....i tought it was a weight that needed to be removed , did we screwed up something ?
  25. ValerianMagnum

    B&M vs Transgo opinion and budget $$$

    Ok guys beside the transgo tf2 whats the best "simple" shift kit to install ( firm shifts ) , 2500 stall , 360 duster / 3.91s , some places said the trans tail housing needs to be removed and some says it doesnt , the new 727 is back in the car and i dont want to spend a fortune and pay extra...
  26. ValerianMagnum

    Being fooled in 2008 with a garage/shop...we found this today !!

    ...360 in my duster with a 727... it blew up at my first summer with the duster, made a deal with a garage and they tried to rebuilt it..yes tried... ** took them 6 attemps and 2 trans cases , took months to have it worked the right way , once it was fixed it ran very good for years until last...
  27. ValerianMagnum

    400hp and a lock up transmission ?

    Hi guys changing my 727 soon for a stock one with hduty parts , we will see but im pretty sure im gonna hate it ( had a 727 with a 2900 stall and s-kit ) i went crazy this summer and bought 4x 904 trans and 4-5 set ups of kickdowns ( oem + lokar ) my question is that 3 of my 4 904s are lock ups...
  28. ValerianMagnum

    [SOLD] NOS MOPAR VALVE COVERS

    NOS Mopar 273 318 340 360 Black Finned, Die-Cast Valve Covers, Hard to Find! Incredible condition, never been installed , asking 250 usd + shipping * i have paypal , thank you ( located in montreal / canada ) shoot me a pm
  29. ValerianMagnum

    Need gear ratio , tire and rear end ratio experts ! Green Rat Project

    hi Guys ! so ive decided to rethink everything since january and ill go with a 5.2 magnum , roller engine , maybe ported heads and a small cam but to start the project it will stay stock for a while , my goal is to have it under 2900 pounds , bought the 5,2 with a complete nv3500 _ 5 speed from...
  30. ValerianMagnum

    [FOR SALE] Factory black dash pad : ok but needs love !

    Hi guys i have a nice dash pad for sale it needs love but an easy restoration or even a quick coat of black paint and light sanding will help a lot , it was off my 70 duster that i sold a couple years ago , pretty long piece im asking 180 usd with paypal fees included and express shipping...
Back
Top