Search results for query: *

I want to do some painting (door jams, engine bay ets) just for my stuff...not for daily work. What Respirators are you guys using to spray single stage Urethane and or Base Coat Clear Coat ? What do you feel safe with for occassion use ? I will be painting in 2 car garage, with fans pulling...

Looking for a stock unmodified 727-904 Valve Body...All I really need is the upper half with all the stock valves. Would need to see pictures with date code markings. Thanks

What were some of the smaller (single pulley) pulley sizes that were used on the old round back/ square back alternators ? Who sells them ?

Need a small alternator (say 90amp) . What year, make,model will fit a small block mopar ? with single V belt. Oh also external regulator type.

Found two 15" Rallye wheels that I forgot about. Can anyone tell me what width the 15" Rallyes wheels were from the factory...I think that they are the large bolt pattern. Thanks

Can a Saginaw (canned Ham ) PS pump be used on an early 318 with cast iron WP (pre 1970) since the pulley alignment changed with the later LA 318 engines. What brackets would be needed ? Just looking for some information. Thanks

I once saw a report that the Chrysler Turbine car,s paint color " Turbine Bronze" was never used on production vehicles. And the paint code MM1 used on 1966,67,68 Dodge,Chrysler,Plymouth cars was a close match (but not the same exact color as the real Turbine cars). Is their any truth is...

The 5/16" threads for my thermostat do not feel good/ might strip. Can I enlarge the thread size to 3/8" without creating a problem ? Will they have enought material to tighten correctly ?

I have a 1963 318 Poly. I think that I have a harmonic balancer issue. The early poly engines have the timing mark on the passenger side of the engine, like the early 273/318/340. And the later LA small blocks have the timing mark on the drivers side. Does anyone know if these timing marks...

I've got a set of 15x7 police wheels (4.25 backspacing I think). What trim rings will fit ? They don't need to be correct, just fit .

Since my 318 has headers, how much heat would be going up into the exhaust crossover system? Since that system was meant to be used with manifolds and a heat riser. I know that most people seem to block the crossover port under the intake, but without a heat riser would the amout of heat be all...

I have a old MP electronic distributor with adjustable VAC advance. Would this be a better distributor to use VS a stock production electronic unit for a daily driver/cruiser vehicle ??

I know that all of the after market brake companys say that you need at least 18" of vacuum to operate a power brake booster. But in the real world of of cars that have some modification (mine is stock) , how much /or how little vacuum is really needed to operate a power brake booster (my 318...

Does anyone know what brake pedal ratio mopar cars have with manual brakes, are all mopars the same ?

Just put 2.75" calipers on my car. Should I use the 1 1/32" MC , or the 15/16" MC ? this is for a manual front disc/ 10" rear drum system. Thanks

do you guys use the rubber bands when mounting your slider calipers ??????

Can anyone tell me what the diameter is for the water pump pulley for a Small Block with factory AC ? Thanks

Thought someone here would know. Thanks

What year/ and model of mopars had the big piston calipers (2.75") for the slider brackets ? Also ifyou would swap out the smaller calipers (2.60") for the larger ones, would you need to get a master cylinder with a different bore size (I have power breakes a cpp kit)

Looking for a 318 Poly 2 Barrel intake manifold " Cheap- Free" I'm in the N.E. Ohio (akron area)

Selling my 1964 Dodge A100 Pickup. I bought this truck from Alpine, California about 8yrs ago. 273 V8, Edelbrock Performer intake, Edelbrock 650 AVS Thunder carb, Rebuilt 727, Dodge Dakota disc brakes, Vintage Air/Heat, Weld Pro Star wheels, New 225/75/15 tires, new Dual exhaust, Custom...

Does anyone know what the brake pedal ratios are for Dart/Duster with power Brakes...and the ratio for manual brakes. Thanks

whats your thought about using 17-18" wheels with 10" drum brakes on rear and disc on front/ as far as the rear drum looking too small for the larger wheel. I don't plan to use wheels that have a lot of open /see through area. But would rather find more beefy looking wheels. But would still like...

I see this on 727 parts 1962-1970........1971-UP ? So what changed between 1970 and 1971-up ?

Is there a reason not to paint the under carriage of car with Rust Killer (after you wire brush any loose material). My plan is the wire brush the underside then brush paint on the Rust Killer, and leave it like that (maybe 2 coats). Will leaving the Rust killer exposed cause any problems...

Just bought a 62 ply Fury with a push button 727. Seams to have front seal leak. For those of you that know more about automatics, how much of a possibility would the paper pump gasket and Big pump O ring be leaking ? or just a better possibility of just the front seal ??

just asking because I have no idea (stupid question time) Is it possible to install A body upper control arms on to a B body ?? I mean will the even fit across the upper frame mount location ? Like I said I have no idea. OK let me have all you negative replies . Only asking because some guy...

anyone got any idea of what it may cost to ship a rear center section / any what shipper would do this? I have a 489 case with 4.56 gears, that I have not used in a long time , and never will again. Time to sell some things.

On my 46 dodge streetrod I've mounted a pair of Remote battery charging post. I still need to run the cables. Do I need to run a (-) cable all the way to the battery, or just a short one to the frame ? Also the truck has a GM style side terminal battery. Will this be a problem connecting the...

Looking for a part # for a Chrysler electronic distributor (no after markets) for my 318 LA , mostly stock, small cam/ 4 brl street driven cruiser. Where any part numbers better for performance/mileage. Was thinking of getting one from rockauto (they list OEM part numbers). Did the 340/360...