Search results for query: *

  1. J

    Need help

    Ok I have this 1990 360 i wanna put in my 67 Dart but i'm not sure wat i need to do far as my headers. Right below the exhaust ports on the heads there are these lil holes and im not sure what they are. I don't wanna put the engine in the car and fine out the holes are causeing exhaust leaks...
  2. J

    what do you do for a living?

    I am a Tire builder on a R1 machine at goodyear been there almost 3 years now. Gets borning also but pays good. I also work on the rust buckets around Fayetteville i say rust buckets cause most of the people i know don't know how to restore a car they just slap some paint on it and say it's...
  3. J

    426 Stroker info

    Has anyone done a 426 Stroker kit on a production 360 block yet. I just wanna know before i purchase the kit then find out i need a new racing block or something else crazy like that. Some one fill me in on a little info on the 426 pro's con's would u do it or not. If I build on i'll probably...
  4. J

    Just bought a 360

    yeah from what i've looked up they come in either truck's or industrial veh. or in my case a van. I'm thinkin if i drop it in my Dart with headers and alum intake. It'll make something close to 300 hp maybe.
  5. J

    Just bought a 360

    wow at 8 to 8.5 i'm not doing nothing bout a complete rebuild not much to work with there
  6. J

    Just bought a 360

    if i where to run this engine with out going into the bottom end, just a cam change about how much power will it make. last question how much compression did they make in 90-91 360's
  7. J

    Just bought a 360

    kool any comments on the heads any good or should i swap in my J heads for right now. I'll probably be running this engine untill i get the part for my stroker.
  8. J

    Just bought a 360

    found the head casting number 4448308
  9. J

    Just bought a 360

    rockers are mounted on the shaft
  10. J

    Just bought a 360

    Push rods are not solid so it does oil throu push rods
  11. J

    Just bought a 360

    I just bought a 360 complete engine today casting number on the side is 53006921 date code on the other side is 11/7/90. Now whats odd is this motor has a roller cam in it. I knew roller cam could be installed in these motors which is why i was buyin it but i didn't think the 91 dodge vans...
  12. J

    Serpintine belt setup

    AWW GOOD THINK IS I'M ALREADY GOING WITH A ROLLER CAM :cheers: YESSSSSSSSSSSSSSSS LOL GOOD NEWS
  13. J

    Serpintine belt setup

    Awwww sounds like a day of fun, if theres no other way ill make it work cause i been tired of the multiply belts for some while now
  14. J

    Serpintine belt setup

    Ok found a 90 360 block to rebuild but does any one know if the serpintine belt setup on a 97 dodge ram will fit this 90 engine
  15. J

    Which engine should i go with

    thats around my power rang Larry, not really worried about the money right now. Just got a good job and dont' have any bills beside a phone, Lawyer fees (for speeding tickets), rent, and gas (yeah gas is still a bill). But i wanna get this done while this good job last u know. Hopefully it's...
  16. J

    Voodoo Cams

    yeah they do have a popcorn sound and not the lopy sound people a use to I installed on in a friends Chevy, afterwards i told him it sounds good for a chevy and makes pretty good mid and high rang power, thats a big compliment coming for a big dodge owner i think.
  17. J

    Which engine should i go with

    im lookin to get 550 at the crank just somethin i can drive to the track race a lil and drive home without gettin my *** handed to me on every pass. Really i want to go fuel injected but i do not want one of these newer Charger engine in my Car. I want to give the classic muscle look inside...
  18. J

    Which engine should i go with

    Hello, I am lookin for a engine to storke for my 67 Dart, thinkin of going with a roller type engine but i'm not sure which year's they came in. Would i be correct to go with a 93-to 03 dodge ram 360 block?
  19. J

    Sure Grip or not

    ok it actually happen more then once and the gears are either a 3.23 or a high 2 something. I check the gear ratio a whille back by jackin up both rear wheels and countin the number of times the wheel rotated and the yoke. i actaully checked twice one only rotated backwards the other time both...
  20. J

    Sure Grip or not

    Ok a few years back i purchased a 8 3/4 from a salvage yard it has a 741 center and it came out of about a 73 or 74 Dart. I got it for $275 but heres the thing the other day i backed up about 15ft on the street just to get straight and when i gunned it both wheels spun, one a lil less then the...
  21. J

    Charge and run like crap

    Yeah mine dies over night been meaning to get a relay just haven't picked one up yet. Atleast now it runs the way it should thanks superdart
  22. J

    Charge and run like crap

    You are dead on superdart that was exactly me problem also my only concern now is that the regulator is gettin 12 volts even when the car is off would this keep the alternater in charge mode and pull the battery down. Maybe i should invest in a relay. Thanks superdart for the help I have been...
  23. J

    Charge and run like crap

    13.8 to 14.0 at the battery I would have gotten you the Ac but my started has been gettin weak for a while now and it quiet on me tonight. Hey maybe it was the starter shorting out. Oh well gettin a mini starter Friday.
  24. J

    8 3/4 rear

    OK will a sure grip be locked all the time or just sometime. Sometime when i do a burn out i can leave 2 beautiful lines on the street and then other times just one most of the time just one. Do i have a sure grip thats just wornout or something. Rear came out of what looked to be a 72 to 74...
  25. J

    Charge and run like crap

    Ok i have a 2 field alternator, Proform aftermaket electronic ignition, stock voltage regulator just replaced because the old one died, and amp guage is by-passed. Car just doesn't run worth a damn with the alternator charging thou.
  26. J

    8 3/4 rear

    Can someone tell me how can I tell if I have a sure grip rear end. Right now if I back up about 15 feet the rear locks both rear wheels, sometimes, and every now and then both wheels will be locked with out backin up 15 feet.
  27. J

    Charge and run like crap

    Oh when my alternator is charging the car runs like **** as soon as i disconnect the alt the car runs fine. I wanted to know how much voltage should be at the coil and both sides of the resistor thinkin maybe something isn't hooked up correctly.
  28. J

    Which Ignition Box Do I Need

    So redfastback if i where to put in stronger springs to delay the curve and put a light spot weld in the slots the weights slid in to stop them for sliding all the way back would this fix my problem. Or do u mean I need to weld something on the vaccum advance.
  29. J

    Which Ignition Box Do I Need

    So basically i need to weld up the weights in the distributor and if this is what you mean can u give me a lil more info on how to do this cause i'm about to take apart one of my electro distributors now and see if i can get it right
  30. J

    Which Ignition Box Do I Need

    Ok I blew a head gasket a few weeks ago on basicaly a new engine. I'm thinking it was due to the ignition. I'm thinkin the ignition may not be up to the job of the engine, timing was set properly but at high rev's it sounds and feels like the timeing is off. I tried readjusting the timeing...
Back
Top