Search results for query: *

  1. rustytoolss

    painting Respirators (single stage Urethane-BCCC ) what are you using ?

    I want to do some painting (door jams, engine bay ets) just for my stuff...not for daily work. What Respirators are you guys using to spray single stage Urethane and or Base Coat Clear Coat ? What do you feel safe with for occassion use ? I will be painting in 2 car garage, with fans pulling...
  2. rustytoolss

    [Found!] Wanted 1967 727-904 Valve Body

    Looking for a stock unmodified 727-904 Valve Body...All I really need is the upper half with all the stock valves. Would need to see pictures with date code markings. Thanks
  3. rustytoolss

    Small Alternator single pulley

    What were some of the smaller (single pulley) pulley sizes that were used on the old round back/ square back alternators ? Who sells them ?
  4. rustytoolss

    Looking for a Denso alternator with single V belt

    Need a small alternator (say 90amp) . What year, make,model will fit a small block mopar ? with single V belt. Oh also external regulator type.
  5. rustytoolss

    OEM 15" Rallye wheel widths ?

    Found two 15" Rallye wheels that I forgot about. Can anyone tell me what width the 15" Rallyes wheels were from the factory...I think that they are the large bolt pattern. Thanks
  6. rustytoolss

    Saginaw (canned ham) PS pump on early 318 with cast iron WP ?

    Can a Saginaw (canned Ham ) PS pump be used on an early 318 with cast iron WP (pre 1970) since the pulley alignment changed with the later LA 318 engines. What brackets would be needed ? Just looking for some information. Thanks
  7. rustytoolss

    color of Turbine car... Question

    I once saw a report that the Chrysler Turbine car,s paint color " Turbine Bronze" was never used on production vehicles. And the paint code MM1 used on 1966,67,68 Dodge,Chrysler,Plymouth cars was a close match (but not the same exact color as the real Turbine cars). Is their any truth is...
  8. rustytoolss

    rethreading thermostat holes from 5/16 to 3/8 ?

    The 5/16" threads for my thermostat do not feel good/ might strip. Can I enlarge the thread size to 3/8" without creating a problem ? Will they have enought material to tighten correctly ?
  9. rustytoolss

    Early-Late Harmonic Balancer question.

    I have a 1963 318 Poly. I think that I have a harmonic balancer issue. The early poly engines have the timing mark on the passenger side of the engine, like the early 273/318/340. And the later LA small blocks have the timing mark on the drivers side. Does anyone know if these timing marks...
  10. rustytoolss

    cop wheels ..what trim ring will fit ?

    I've got a set of 15x7 police wheels (4.25 backspacing I think). What trim rings will fit ? They don't need to be correct, just fit .
  11. rustytoolss

    Random question.. intake exhaust crossover with headers ?

    Since my 318 has headers, how much heat would be going up into the exhaust crossover system? Since that system was meant to be used with manifolds and a heat riser. I know that most people seem to block the crossover port under the intake, but without a heat riser would the amout of heat be all...
  12. rustytoolss

    Vintage MP electronic distributor on street driven car ?

    I have a old MP electronic distributor with adjustable VAC advance. Would this be a better distributor to use VS a stock production electronic unit for a daily driver/cruiser vehicle ??
  13. rustytoolss

    Engine Vacuum and power brakes ?

    I know that all of the after market brake companys say that you need at least 18" of vacuum to operate a power brake booster. But in the real world of of cars that have some modification (mine is stock) , how much /or how little vacuum is really needed to operate a power brake booster (my 318...
  14. rustytoolss

    Mopar cars brake pedal ratio ?

    Does anyone know what brake pedal ratio mopar cars have with manual brakes, are all mopars the same ?
  15. rustytoolss

    15/16" MC with 2.75" calipers any problems with stopping ?

    Just put 2.75" calipers on my car. Should I use the 1 1/32" MC , or the 15/16" MC ? this is for a manual front disc/ 10" rear drum system. Thanks
  16. rustytoolss

    slider caliper rubber bands do you use them ?

    do you guys use the rubber bands when mounting your slider calipers ??????
  17. rustytoolss

    Small Block with AC Water pump pulley size ?

    Can anyone tell me what the diameter is for the water pump pulley for a Small Block with factory AC ? Thanks
  18. rustytoolss

    How many 1970 Challenger RT (383) with 4 speed ?

    Thought someone here would know. Thanks
  19. rustytoolss

    Big piston calipers ?

    What year/ and model of mopars had the big piston calipers (2.75") for the slider brackets ? Also ifyou would swap out the smaller calipers (2.60") for the larger ones, would you need to get a master cylinder with a different bore size (I have power breakes a cpp kit)
  20. rustytoolss

    [WANTED] 318 Poly 2 Barrel intake manifold.

    Looking for a 318 Poly 2 Barrel intake manifold " Cheap- Free" I'm in the N.E. Ohio (akron area)
  21. rustytoolss

    [SOLD] 1964 Dodge A100 Pickup V8, Auto, AC, Disc Brakes more

    Selling my 1964 Dodge A100 Pickup. I bought this truck from Alpine, California about 8yrs ago. 273 V8, Edelbrock Performer intake, Edelbrock 650 AVS Thunder carb, Rebuilt 727, Dodge Dakota disc brakes, Vintage Air/Heat, Weld Pro Star wheels, New 225/75/15 tires, new Dual exhaust, Custom...
  22. rustytoolss

    A body brake pedal ratios ???

    Does anyone know what the brake pedal ratios are for Dart/Duster with power Brakes...and the ratio for manual brakes. Thanks
  23. rustytoolss

    your thoughts ? 17"-18" wheels with 10" rear drum brakes ?

    whats your thought about using 17-18" wheels with 10" drum brakes on rear and disc on front/ as far as the rear drum looking too small for the larger wheel. I don't plan to use wheels that have a lot of open /see through area. But would rather find more beefy looking wheels. But would still like...
  24. rustytoolss

    727 trans question 62-70.....71 - up ????

    I see this on 727 parts 1962-1970........1971-UP ? So what changed between 1970 and 1971-up ?
  25. rustytoolss

    Applying Rust Killer to under carriage /frame any reason not to ?

    Is there a reason not to paint the under carriage of car with Rust Killer (after you wire brush any loose material). My plan is the wire brush the underside then brush paint on the Rust Killer, and leave it like that (maybe 2 coats). Will leaving the Rust killer exposed cause any problems...
  26. rustytoolss

    automatic (push button 727) front seal leak ?

    Just bought a 62 ply Fury with a push button 727. Seams to have front seal leak. For those of you that know more about automatics, how much of a possibility would the paper pump gasket and Big pump O ring be leaking ? or just a better possibility of just the front seal ??
  27. rustytoolss

    just asking differences between A & B body upper control arms ?

    just asking because I have no idea (stupid question time) Is it possible to install A body upper control arms on to a B body ?? I mean will the even fit across the upper frame mount location ? Like I said I have no idea. OK let me have all you negative replies . Only asking because some guy...
  28. rustytoolss

    Shipping rear center section prices ?

    anyone got any idea of what it may cost to ship a rear center section / any what shipper would do this? I have a 489 case with 4.56 gears, that I have not used in a long time , and never will again. Time to sell some things.
  29. rustytoolss

    Remote battery post...cables ?

    On my 46 dodge streetrod I've mounted a pair of Remote battery charging post. I still need to run the cables. Do I need to run a (-) cable all the way to the battery, or just a short one to the frame ? Also the truck has a GM style side terminal battery. Will this be a problem connecting the...
  30. rustytoolss

    318LA driver, mopar built Electronic distributor. anyone better than others ?

    Looking for a part # for a Chrysler electronic distributor (no after markets) for my 318 LA , mostly stock, small cam/ 4 brl street driven cruiser. Where any part numbers better for performance/mileage. Was thinking of getting one from rockauto (they list OEM part numbers). Did the 340/360...
Back
Top