Search results for query: *

  1. C

    Machinist will not build engine unless roller cam is used!

    Jim, my catalog does not show a p/n for small block. Trend Perf. 800-326-8368
  3. C

    Machinist will not build engine unless roller cam is used!

  4. C

    Machinist will not build engine unless roller cam is used!

    I have been using Trend 513 tool steel SFT's, and pushrods. in comparison they have a huge radius , weigh like 65 grams as compared to 125/130. I don't need heavy springs any longer. I also use Ti. intake valves basically same weight as exh. ss. But i back out at 6300. 512/400. I know this post...
  5. C

    Cylinder wall weld??

    Furthermore, I like 2% thoriated tungstun 1/16" dia. but you may have to go to 3/32". pure argon shielding gas at 10-15 inches. i claim old and forgetful. Pick up a weld directory too.
  6. C

    Cylinder wall weld??

    Hello gentlemen, I guess I will step in on this post. These types of repairs are kind of iffy but seem to work ok on cast iron. I found out that if the block etc. is super clean and ground out, heated up well, and come in with a Tig machine with a 1/8-3/32 499 nickel rod that has had the flux...
  8. C

    Cleaning old aluminum slotted wheels

    What kind of acid for alum wheels?
  9. C

    Not sure this intake will feed 600 hp

  10. C

    Loose some weight.

    Hello A Bodies, I am trying to get my old 64 Polara put back together. My question is what is the weight difference a 1967 B-body 18 spline 4-speed and a 23-spline 4-speed. Also, same difference with the 67 B-body dana-60 powerloc 4:10 and a 8-3/4" powerloc . They are complete units. Thank you...
  11. C

    weight differential

    Hello, can anyone tell me approximately the weight differential of the B-body factory D-60 4 .10 powerloc and a 8-3/4 powerloc and housing complete. Also the complete 23spline as opposed to the 18 spline 4-speed trans. This will my last go around with my old 64 440 or Polara and I don't see the...
  12. C

    Shuebeck lifters?

    I really like my Trend H-13 sft's with oil hole in the face.They also have a GOOD radius on the face. I think 68 grams is the weight, that is alot better than 120-130 grams. I've ran the piss out of them with 3-different cams and getting ready for a 4th build. I think they are cheap at any...
  14. C

    Sacrifice sacrifices

    He must need a little WHISKERBUSCUIT!
  15. C

    Settle an argument for me. Dog related

    ARF! ARF ARF!
  16. C

    Fiberglass hood maker

    GTX, i need a fiberglass hood for my 64 polara. How can I contact you. Thanks.
  17. C

    Unusual Hobbies

    My Kitty doesn't like possums on the patio either but she is too skeerd to shoot a 22. she thinks it will get her fat kittycats.
  18. C

    Theme Song for your Car

    let it all hang out.
  20. C

    Is this the grandaddy of Mopar vacuum fittings ?

    to many hoses for me!
  21. C

    Headers

    Just buy the el cheepos on jegs/summit etc. Probably have to do some heat/hammer work anyway.
  22. C

    R.I.P. KOWALSKI

    Kowalski, are you still out there.
  23. C

    Add Your Own Caption Part 319

    Somebody, Hold my sodie!
  24. C

    PRO/STOCK air cleaner research ??

    When I was a kid in the early sixties I commonly heard them called 3/4 inch cams. Good old Midwest living. Still very funny to me.
  26. C

    air fuel wideband guages

    I want to purchase 2 wideband guages and want opinions on what brand to buy. Right now I am looking at the AEM and the Innovate. What do you Gentlemen think. Thanks
  27. C

    440 break in noise from timing cover....we think....be gentle!

    You should have witness marks. I would pull the front cover. Good luck
  28. C

    Recreating MP Viscous Fan Kit

    Richard Erinberg of Mopar Action had an excellent article but I don't know the issue #. You basically need the correct fan and clutch that dyno's about 15HP total loss. I forgot about the Engine Masters episode that tested many fans on a 440. They pulled somewhere from 50 HP down to the old...
  29. C

    Add Your Own Caption Part 313

    Dang, I spilled my beer.
  30. C

    Add Your Own Caption Part 312

    the old lad. Slut., the young lady. Yummy. The old bastard. She would MIND Me!!!
  32. C

    All Three Stooges

    curly, mo, larry, shimp, or joe?
  33. C

    Please pray for Kitty

    RRR, prayers for Kitty and you. My wife of 45 years is called Kitty too. :)
  34. C

    Night Vision......

    Any how, they were Eastern Europeans.!? Anyone?
  35. C

    Night Vision......

    I think maybe that is the first stage of the Seemore? Anyone?
  36. C

    All Three Stooges

    Seems to me like he maybe he has turned into a deep deep dark deep dark dude. Or is this maybe his schtick now?
Back
Top