Search results for query: *

I found one with 48k miles on it, test drove it and liked it a lot. I live in major snow belt areas so awd is better for a daily driver for me. Is this a good car to get? Anyone have any reviews or warnings to share? I test drove the car and it fit me like a glove. Loved the power and even...

Plymouth Barracuda 2 Door | eBay The ad says it had been confiscated from a drug dealer. That explains it, have to be on drugs to do the mods they did!

I picked up this Wilcap adapter kit to adapt a SBC (mainly the 200R4) to a SB Mopar 5.9L Magnum. The flex plate and crank spacer is included with the kit too. I picked it up used and it is still in good condition. Looking to get what I paid for it, $500 plus the ride. Item is located in...

Should strut rods for a 64 barracuda look like this? I'm thinking it should be straight.

I picked up the car in October with quite a few problems. I fixed the problems so I could get it inspected (Oil Plug was stripped, oil filter needed adapter, full exhaust installed, rear shocks, shift cables for park and gear selector). I'm in the process of looking for a house and I could...

No matter how many times I look at the front end of my Barracuda I just can't get into the look of the front end. I love just about any other angle of the car. I've always been a fan of the 63, 64, and 65 dart. Anyone near the Buffalo NY area or within 300 miles of have a good front clip...

I finally took my barracuda out for some higher speed cruising. I got up to 65 and the speedometer was really really loud. Is there a way to properly lubricate the speedometer? Suggested oil to use and proper method? Thanks!

So I was bored surfing Craigslist and I came upon a listing for a mostly swapped 5.7L Hemi Conquest. I guess the guy is in a bind and needs money. I don't need a project like that right now so I told the guy I'd be interested in the Hemi if he parts it out. I'm basically after the...

I know it seems counter productive, but has anyone swapped the heads, intake, and injection system from a 5.2L Magnum engine onto a 360 LA engine? I know there would be a compression bump up. I can get a killer deal on a 5.2L magnum setup off of a jeep, with fairly high miles. I'd basically...

The trans in the barracuda feels like its slipping badly. Havent driven it enough to break it or wear it out. I just dropped the pan and filled it with the atf for all makes and models. Now its like it takes forever to catch gear. Kickdown is connected. Cranks fine. Could it be the cable out of...

I'm doing an Exploder axle swap on the barracuda and I am in need of shock plates. I have been told that the 8-3/4 ones work. Anyone have some for sale? don't have to be perfect, just not rotted badly. PM me prices shipped to 14141. Thanks!

The early A body 904 Shift Cable seal is a standard #10 O ring. I had to get one over the weekend and I figured I'd post this up here just in case someone needs the info.

Anyone have good pictures of an aftermarket Early A body sway bar installed? The one I picked up seems to be setup to mount to the axle, not the body like the factory one. This is going on my 64 Barracuda. Thanks!

Browsing Yahoo on break and I saw this whole article on how to do romantic things for your girlfriend that don't cost anything: http://yahoo.match.com/y/article.aspx?articleid=7016&TrackingID=526103&BannerID=1379170 There's seriously 13 things. All of which will make you seem like a stalker...

Actual Apollo 10 Transcript:

It looks like someone put a B-body cable in my car and it gets into the steering. It got caught up in my steering last night and stranded my car at my girlfriend's house. Quite embarrassing. Does anyone have an A body push button shift cable they want to sell? Zip is 14141 if you can let me...

Changed the speedo seal and now everything jumped a button on me. R is N and 1 doesn't push. Should I adjust the cable one click? Counter clockwise?

Changed my speedometer cable seals yesterday on the 64 barracuda. Since I know people were asking about it here are the o rings I used: Big O ring for the housing seal is a -057 standard ring. 1"x13/16"x3/32" cross section. Small O ring for the gear seal is a -078 standard ring...

I was at the fairgrounds in Niagara County NY for a parts swap meet and car show on Saturday. Saw some really nice mopars there. I saw a really nice Teal colored 66 Dart and spoke with the owner about his sway bar setup. Also saw a 65 dart in the for sale section that I recognized from...

I'm not sure my Barracuda will make the 5 hour trip down there. I have every confidence in it mechanically, just the fuel gauge working whenever it feels like it worries me. Anyone from the Western NY or NW PA area going this year? Or are any members from up north heading back through the...

So I'm thinking I really don't want to cut the floor pan on my car like I'd have to with the T5 or T56 or even a 200R4 swap. it's the cleanest I've ever seen on cars I've owned (minus my brand new dd). I had an 81 D150 with the Aluminum housing 4 speed with OD and that truck averaged 20...

So the original speedometer cable is leaking fluid out of the sheathing on my 64 Barracuda. The cable is the original push button 904 one. Where do I go about finding the seal? and do I have to drop the pan to get to it? I have a pan seal but I was hoping I wouldn't need it since the pan...

I sourced this disk brake setup by ordering individual parts that were OE from a 75 Dodge dart. Parts include: NEW Spindles and caliper brackets for standard 11" rotors NEW Castle Nut kits DR. Diff small ball joint to large ball joint adapter sleeves DR. Diff 4 bolt MC to 2 bolt MC...

I have a pair of used SS springs for sale for an A body. they are the 002 and 003 springs. I'll get a pic up of them up tomorrow, gotta borrow a camera as my phone decided to stop taking pics. Not much rust, came from California, just bout them recently off a member here. Buying a...

I'm selling off my spare parts and probably the Barracuda so I can get a house. Been having bad luck lately and I'm done with renting. These rims have some corrosion on them and the mustang center caps are in rough shape. Abe's eye touches the tread if you put him in head first...

Before I read up on the SS springs I bought a pair, thinking they would do the trick for my setup. Now I'm thinking a stock height but stiffer was what Is should have gotten. I'm thinking about buying a house and I really don't have the cash to get another set of springs. My old springs...

I'm looking for a Fuel Sender for my car, I think the 50 year old one finally gave up the ghost. I found this sender on rockauto: Dorman 692-152 Says 80 Ohms Empty and 10 Ohms Full. I've read that the Mopar one is non-linear and that most aftermarket ones are linear resistance...

Noticed my heater core is leaking, I figure if I'm taking the box out to change that I should replace the heater box. It looks like someone kicked it in. Located in Buffalo NY area. Looking for a good heater box, preferably not broken.

Last fall I decided I had the muscle car itch again. I've always loved the look of B bodies, and some of the A bodies. Well since my budget was low I looked to A bodies. Found a craigslist ad for this car for $5000, saw it was listed before for $6800. I figured I could haggle the guy...

I'm looking to build an early fast back dart/barracuda combo. I have a pretty good almost no rust front clip on my 64 Barracuda. Anyone have spare 65 Dart front fenders, lower valance, and hood they want to swap? Would also consider 64 Dart parts too. I'm located near Buffalo NY, can...