Search results for query: *

Dropping price to 6900. Would be interested in trading for an srt 4.

Im assuming I should have given more details about the engine, or im just to high in price to even get much interest other than picture hoarders? Engine details The block has half fill of cement. The crank is stock stroke scat crank. aftermarket 318 rods. racetech pistons .080 over. static...

Selling my Duster 360. Located in Mitchell, SD. Asking 8500.00 http://sd.craigslist.org/cto/5176215090.html click on link for my craigslist ad. Thanks again.

Fluid coming out of bellhousing not possible and still drivable. I would take a wild guess that its either the front seal or o ring on dipstick. As for the vibration need more detail. Was motor freshly built? by you? or someone else. Is the balancer and converter both externally balanced? Is...

Yep it sounds like a battery on the edge. I have noticed the same with a few of my small blocks also. They will crank until battery is dead but wont fire with out a little help from charger. Soon as that happens i replace battery and its cured. I put msd on the duster this 2 summers ago and it...

Yu sure it isnt your hazard flasher?? It could be that it is that hazard flasher ad its not working properly. They will try to flash even with key off. Replace it and see what happens.

im running that cam in my 360. If i remember correctly the springs were 140 at seat, and i remember for sure that they are 350 at max lift, with coil bind just after that.

Just splice your 2 post shut off into your ground, that would be the negative wire in case you arent sure. Doesnt matter if your running an alternator then. It stops the circuit and will kill the car.

If you have your original and it is in any kind of shape better than complete trash, i would suggest just recovering that one. It will fit and function hands down better than the abs ones do. The abs ones are better than staring at the bare roof, but only barely.

replace it?

I would go with a 284/484 mopar cam. Im sure there will be 27 others that say you need a comp cams xe something or another. Its all in whatever you want. I have ran that cam in a few different motors. Very nice and streetable. Dont forget to upgrade the rockers to heavy duty, because with the...

A car that came with a folding rear seat would be a good start. Definately more than a couple hinges. Im not saying its not possible to convert one over to folding seat, but its not very practical.

What kind of vehicle is it in or out of? If it doesnt have a rear cover it is either an 8 3/4 or a ford 9. On the drivers side of the carrier, scrape all the grease off and look at the last 3 number. Should be a 741, 742, or a 489.

I had a problem with them. I wish i knew where the pictures were at. There was a rod sticking up threw the top of the intake. i would rather run heavy trw forged pistons than kb hypers. I think they have went the way of menards and walmart products. brand name but cheapened up to sell. In...

I can concur that the abs healiners are in my opinion are crap. I should have kept the original and just had it covered in vinyl or fabric. Its fit and function would be 110% better. Also alot easier to put back in with it not being all flexible like the abs. I did install the abs one mine...

Are your hazards pulled? I had accidently had it pulled and did same thing. The hazard flasher took a crap and just turned them on instead of making them flash. It took bumping into it and the heat coming off of it gave it away.

Today was the day to put in the new headliner in my 74 duster. ABS plastic covered with white vinyl. I had read on here someone saying they would rather put up a fabric one with bows than an abs. I thought that statement was crazy up until a few hours ago. The stock one was stiff and i was...

You can do a search and find them everywhere. Pro fit auto interiors has them. http://www.profitautointeriors.com/products/Plymouth/1974/Duster/7076-DUSTERDEMONDART-SPORT---ABS-PLASTIC-HEADLINER---PLAIN/76992/HL70CV-M.html stockinteriors.com has them, year one.com, and im sure a few others...

I dont think it will work. If it got wet enough to sag the headliner board, its guaranteed that there is enough rust on the inside of the roof line it wont stick past the end of the driveway. I have never done it so dont quote me that it wont work. I just wouldnt have high hopes of it working...

15x8 wheel with 4 inch backspacing. You can just fit a mickey thompson 10.5x28 slick. It will just clear the leaf springs on the inside. I did also trim the wheel well lips just a small amount to make sure it wouldnt rub on them while turning. 275/65 street tires of almost all brands should...

Sounds like your 180* off. Or something is off with your cam timing.

When it starts running on put the accelerator pedal to the floor. Should kill it. Had a 318 scamp that would run on and on and on and on. Flooring it ussually killed it right away. I started running better gas and that for the most part eliminated the problem.

It could be the converter bolts just on the edge of nicking. With it being more right side predominent, im wondering about mechanical fuel pump. I had an intermittent rattle. It was the arm on the fuel pump. Good luck

My guess is that it has nothing to do with your car. It probably got tossed in the box by someone and left and forgotten about. I have tossed random stuff in boxes they dont belong in before. Kinda looks like what you would pound into the ground to hold it up, weather it be a tent or a small tree.

I have had the map light tucked up under the dash for the last decade or better. Im working on the interior and decided i would get it working again. Its hooked up and works fine, but im lost as to where it exactly mounts. I know it goes on the passenger side, but i dont see any holes in the...

If i was able to take a pic i would. Hopefully i will be able to get back under the hood in a few weeks. All i did was cut the lid so it just fits over the filter. Then wrapped the top edge of the base with pipe insualtion to make it seal to the hood. Simple and effective.

Ill be there. I dont know if we will have the old challenger, the new challenger or the duster. None of them will be in the show. Just transportation to and from. Has anyone heard if the burn out contest is officially on for sunday??

pm sent back. Thanks

Big hurries, lead to big mistakes. Free piece of advice you can take with you. It applies to more than just your issue at hand. Good luck.

No problem on the grounding tip. Yes its can be a pretty good jolt, depending on the amount of milojules you are running. You getting zapped is nothing compared to the car or equipment finding its own ground source and making a jump. Not good deal if paint booth has some fumes. If the paint...