Search results for query: *

  • Users: grimreaper
  • Content: Threads
  • Order by date
  1. grimreaper

    [SOLD] 1964-66 Rear Window seal Gasket

    Precision DB3329 gasket for back glass on 64-66 Barracuda. I bought it for a car I decided not to do so it has not been removed from the package. $75.00 plus actual shipping.
  2. grimreaper

    [FOR SALE] 1964-66 Carpet protector plate

    Here is a really nice carpet protector for the tunnel of your 64-66 early A-body four speed car. The one on the side of the tunnel by your accelerator pedal. These are hard to find and this one has all ten prongs intact. $100 plus actual shipping cost. Money order or Paypal Friends and Fam...
  3. grimreaper

    Source for distributor gasket?

    Does anyone know of a source for metal distributor gaskets for v-8 distributors? All of mine seem to have evaporated and now I can only find fiber replacements. Thanks!
  4. grimreaper

    [Found!] Manual for Custom Autosound USA-2 Radio

    I bought a used Custom Autosound USA-2 from a friend who had it in a Mustang. He had lost the manual by the time I bought it but showed me how to adjust balance, fader, tone, etc. Since that time I have forgot and so has he. By contacting Custom Autosound I have discovered they have no...
  5. grimreaper

    Front end rebuild - what's it worth?

    A friend of mine has a small vehicle repair shop. A customer who regularly has him work on his modern vehicles from out of town bought a 66 Dart and has been bugging my friend to do some work on it. My friend told him he doesn't usually work on classics as thy are usually not financially...
  6. grimreaper

    Source for 273 Head Gaskets??

    Where do you folks get cylinder head gaskets for a 273 that don't have a 4"+ fire ring? I used the last of my stash a few years back and now when a friend wants to rebuild his 273 I don't find anything at parts houses other than the ones for 340/360 bore.
  7. grimreaper

    [WANTED] W2 offset Rocker Shaft Stands

    Just checking to see if someone has a set of W2 offset rocker shaft stands sitting around before I spring for a new set.
  8. grimreaper

    Turn signal indicator 64 Barracuda- help me understand

    I got tired of tearing my turn signal switch apart every six months when my lights quite functioning correctly so I replaced my turn signal switch in my 64 Barracuda with one of the Daniel Stern replacements. When I got it back together the turn signal indicator (the single one for both R & L...
  9. grimreaper

    California DMV ripped me out of my parts.

    Two years ago a friend of mine in California was at a show and shine with his 71 Challenger when a non-resident, unlicensed, uninsured driver lost control and hit three cars at the show., including his. He found a wrecked 71 in North Dakota near where he grew up, bought it, and hauled it to CA...
  10. grimreaper

    31 Degrees and Snow - no top down

    I had asked the wife earlier in the week what she thought about a drive with the convertible today. She thought it sounded good. Well, today arrives and it's currently 31 degrees and snowing and now she's no longer interested in cruising with the convertible! Supposed to be a high of 44 for...
  11. grimreaper

    Anybody running AP Xcelerator mufflers?

    If you are running AP Xlerators how do they sound. Performance? Drone? What setup are you using?
  12. grimreaper

    [FOR SALE] Fitech Command Center

    For sale is an unused Fitech command center. I bought it from a member on here and my measurements were off due to the inner fender angle so I can't fit it under my hood without serious modifications. The guy I bought it from had mounted it but not used it because he elected to go another...
  13. grimreaper

    Think you know your car parts?

    86% of people can't guess these 50 car parts by looking at just one image. Can you? I missed the bulbs.
  14. grimreaper

    64-65 Glass Lock Strip

    A long while back there was some discussion regarding reproduction of the glass lockstrip for 64-65 early A Bodies. I searched and do not find the discussion I recall. Someone was going to send a sample to someone else to see if there was a possibility if getting it reproduced. A friend scored...
  15. grimreaper

    What's that goo?

    There is some gooey caulk like material on the inside of doors and panels that holds a sheet of plastic in place behind the interior panels. I have always just used gorilla snot, weatherstrip adhesive, or sometihg else I had on hand to re-affix the plastic in the past. What was the stuff used...
  16. grimreaper

    65 Barracuda on American Pickers

    Who all saw the 65 Barracuda on American Pickers? Is the owner a member on here?
  17. grimreaper

    Fitech and throttle cable question

    Has anyone succesfully used the large 1/2" throttle cable position on their Fitech throttle body with a stock cable? I originally hooked the throttle cable for my early A Body to the lower hole but the throttle pedal is stiff. When I move the cable to the top hole with an aluminum bushing for...
  18. grimreaper

    Passon A855 5 speed

    Has anybody on this site received a 5 speed from Passon Performance? I talked to a guy in Capser WY who does a lot of four speed business with Passon Perofrmance and he tells me that there are about 50 sold and delivered units. (There seems to be a tail housing quality issue causing a breif...
  19. grimreaper

    Tis the season - share gag gift ideas

    It's the time of year when we could all use some gift ideas. If you have any cool gag gifts you've made or got any good gag gift suggestions how about sharing your wit?
  20. grimreaper

    Small Block Oil Pick Up Tube Question

    Can anyone provide information on what modifications have been used to allow a greater flow of oil into the oil pump? I have applied several oiling system modifications thanks to the great write up by Guitar Jones but I have a mid sump pan in a passenger car so there is no room for the pick up...
  21. grimreaper

    Distributor cap color question - what year

    What year did Mopar go from the black distributor caps to tan? A friend picked up a 66 Chrysler Newport survivor and is cleaning up the engine compartment. It has a blue distributor cap. I told him to put a black cap on it but then questioned my suggestion. I am 100% sure my uncle's 66 Dodge...
  22. grimreaper

    Can you help with a name and source for this terminal?

    This is used on the the steering column wiring of a 64 Barracuda. What's it called and where can a person buy a couple? Thanks!
  23. grimreaper

    [WANTED] 340 Main Caps-

    Does anyone have a set of stock two bolt main caps for a 340 that you would part with? If so, please PM me.
  24. grimreaper

    Filled block on the street?

    Anybody running a filled or partially filled block on their street car? A couple of my Ford branded friends are running filled blocks and having good luck with them for street cars. One has an external oil cooler, the other doesn't. Are there any Mopar guys on here with experience with filled...
  25. grimreaper

    Washers for shock plates

    I guess over the years I have managed to lose all of my concave washers for the shock plates. I did a little searching on the net and checked with a couple of the box parts houses(who look at me like I've got a third eye when I mention shock absorber hardware)but didn't seem t find any. Does...
  26. grimreaper

    [WANTED] W-2 Rocker shafts (offset)

    Looking for a nice used set of W-2 offset rocker shafts. Anyone got an extra set laying around? ship to 82716 Thanks!
  27. grimreaper

    64-65 Barracuda roof rail weatherstrip ??

    Can anyone help an old fella's memory. Several years ago I replaced some roof rail weatherstrip on a 64 Barracuda and the replacement did not have the hard front tips. Shortly after I installed those I found someone who made reproductions that had the metal moulded into the tips and thought I...
  28. grimreaper

    [WANTED] WANTED 8-3/4 yoke, small u-joint, fine spline

    Looking fo a yoke for an 8-3/4. Fine spline and 7260 u-joint. Anybody got one they would part with for a reasonable price?
  29. grimreaper

    dISTRIBUTOR GEAR WITH SOLID ROLLER???

    I would like to hear what experiences folks have had with various distributor gears (oil pump drive shaft) on solid roller cams, especially the new composites(Comp Cams) and specially treated ones (like Hughes and Crane) I had one setup, more years ago than I care to mention....., with bronze...
  30. grimreaper

    Tool steel lifters??

    Does anyone have any actual, factual experience with the edm tool steel lifters they'd be willing to share? There seems to be a full spectrum of information... one guy says they are the only FT lifter to use these days and the next guy says they're a waste of money and shouldn't be used with...
Back
Top