Search results for query: *

Guys, Have a '67 notch and planning to install some aftermarket gauges under my dash (recently bought all AutoMeter electric short sweep gauges). Will run oil pressure, water temp, trans temp, and a volt meter (will complete ammeter bypass mod as well when installing volt). All stock gauges...

My 67 notch...the coffee shop in the background was named 'Barracuda Coffee Co.' as the prior owner of the shop had two cars, a 2nd gen and an E-body. Unfortunately, he's sold them both.

Guys, Have a 67 notch and the clear lens/black 4-way divider (see green lines on pic) for my gauges has fallen down and is actually resting on my needles. The clear lens itself is loose in the hole so I'm assuming some sort of tab/screw has broken off the back of the bezel. Also assuming a...

Wish I would have read this thread a couple weeks ago! Just finished installing a new B&M cooler and -6AN lines/fittings but used the nitrile braided stainless from Jegs, not the PTFE stainless hose. Tried to find some pressure and/or temp ratings on Jegs' website for the stuff I bought but...

I realize this thread is a year old, but I too am looking for a chrome MC cover for my 67 notch. Just wondering if you ended up finding a place to buy one. All the sizes I'm seeing for sale wont' fit??

so my cam decision has been made and with my new Hughes 1.65 rockers, my lift is gonna end up being .571/.581. I am I still gonna be okay running my OEM lifters with this amount lift? Heads will be RHS X heads assembled by Brian at IMM that are good to .600.

yeah, i wanted a 110 LSA but this cam came in my motor (i bought it assembled) and i don't have to spend a nickel if i keep it. i can have the LSA widened on this cam (Oregon Cam Grinding). Cost is $150 and they said they could get to a 108 for sure, maybe a 110 (wouldn't know until it was on...

more cam for just a weekend street driver? don't get me wrong, i'll get on her from time to time but this car will never see the track. i have no problem camming up if you guys really, really think the rest of the combo and our intended use (street only) calls for it. i definitely want to...

Thanks Dave and txstang84. Yes, car is summer/weekend driver only that will never see the track. I too was worried about my comp ratio with this combo so I've recently decided to make a head change to the RHS X heads (don't trust the casting on these alum heads anyway). FWIW, my elevation is...

Got it. As far as advancing it, what do you recommend? Haven't seen too many 106 LSA's advanced....most have been straight up.

Will not be a daily driver. Summer/weekends only and will never see the track. Gonna make a head change to the RHS X heads soon so comp ratio should drop to something a little more user friendly.

If my math is correct, this cam has 78.5 overlap. Any concern running that much overlap on a street only with my combo?

just wanted to give you guys an update on my cam search. I've come across a basically new hyd roller that has less than 500 miles on it and the specs are close to what you guys have recommended. I can get it for basically nothing and trust where it's coming from. Just want to get your opinions...

I've bought two cables, one from Bouchillon Performance ($37) and one from Richard Ehrenberg, a writer for Mopar Action. http://www.bouchillonperformance.com/ Ehrenberg sells them on ebay and can supply about anything you need. Just type in mopar small block throttle cable on ebay and you...

Good catch guys...obviously missed that on their website!

okay guys, gettting closer to a decision on a new cam. Have narrowed it down to four after getting some advice on here (thanks rustyratrod!) and talking to a few local builders. 1. Oregon Cam grind #1331 - 281/289 adv, 232/240 @ .050, .525/.533, 112 LSA 2. Custom grind from IMM - 270/273...

agree, those rockers look nice but only work on iron heads (i have aluminum). what about the Hughes 1.6 stainless steel rockers (HUG 1560's)? Also, been told conflicting information on whether I'll need to run guideplates on my heads. Have heard if you buy self-aligning rockers, you can...

Thanks for the response on the cam and I'll check out Oregon Cam Grinding. For rockers, I've been told two different things on some Comp rockers I'm considering (part #1618-16, Ultra Pro Magnum 1.6 self-aligning rockers). One person told me these rockers would work on my aluminum magnum head...

Guys, In the market for a new roller cam and rockers for my Magnum 360. The amount of information regarding cam selection is enough to make your head spin and I'm not sure I'm any closer to a decision than I was a month ago! Car is a street driven, summer driver only that will rarely (if...

Guys- Need some advice on rebuilding some heads. Car is a '67 Notch and a weekend driver only...it will never see the track. 1. Heads are MP Aluminum Magnum (MP# P4876624) 2. Engine is a full roller 360 Magnum from a '96 Dodge 2500 3. Cam is 288/292 advertised (230/234 @ 0.050"), .501/.513...

Guys, Have obtained a used set of Mopar Aluminum Magnum heads (#P4876624) and looks like I might need to have the surfaced milled. Don't know much history on the heads, but it looks like they've been worked by someone before? Been trying to find what the minimum surface material...

bobscuda67, Could you please post a close up pic of your throttle/kickdown linkage setup? I'm using the OEM '67 linkage and throttle cable with a new eddy 650. I was able to find a pic of how/where to attach my thottle cable, but haven't seen how/where to connect my kickdown linkage? I've...

73AbodEE, Can you please shoot a pic of your setup from the top that shows how your throttle cable is connected? I plan on adding TrailBeast's spring myself, but am confused about where to connect my throttle cable? I have a new eddy carb with the mopar adapter (#1481) already installed. If...

i'm using the OEM kickdown linkage (the metal bar at the end that is threaded onto the end of the rod coming up from the tranny) rather than a lokar cable. not sure how i'm supposed to connect it to the slotted piece at the bottom? The set up that was on the carb before was completely...

Guys, Having some issues bolting up a new eddy carb. Ordered the throttle lever adapter (eddy part #1481) but seem to be missing another curved piece that has a 'heart shaped hole' that is used to hook up my hard slotted tranny linkage end (see pics...i've added red arrows for identification)...

70Duster440, Just wondering where/from who you purchased your '3rd generation' shroud? Thanks!

PM sent!

PM sent.

PM sent.

PM Sent.