Search results for query: *

Here for sale is my hand built slant six t4 turbo header with 38mm wastegate flange This header was built with heavy wall stainless steel els and was run in my 62 valiant The header is located in Michigan and im looking for 500 dollars plus shipping paypal perfered Have other turbo parts...

Hay guys and gals im in need of some help im thinking about changing my 8.75 out for a dana 60 but im having a hard time finding the gear ratio im looking for. It appears you can only buy 3.54 ratio anymore that appears to be the highest ratio offered on the market today. Ive scored the net and...

I have a nice set of formula s barracuda 340 callouts or hood louvers these so there age with some minor pitting in the grove where the factory painted them black and the agrent paint has started to fade on one of them. All the mounting posts are intact but there missing some of the holddown...

Im looking for a offset 2 bolt master cylinder adapter like the one in the pic maybe someone has one they dont need and there willing to part with it i know i can buy new but trying to stay within my budget shipping to 49234 Thanks Aaron

Well its time fabo here we go the toad is officially under reconstruction ive been gathering parts for the big block swap for the last year. And I finally was able to get a early A drop link from member cosgig THANKS GEOF. I installed the drop link and keep going and installed a empty block 400...

Im in the process of starting the mock up of my boosted low deck big block swap in my valiant and im trying to source out a set a 1/2 thick header flanges for a set of 440-1 heads does anyone have a cad drawing of the header flanges or a basic drawing of set of flanges for these heads i could...

I have a set of nice Bill Miller Engineer aluminum 6.535 rods with chevy 2.2 rod end and .990 piston pin these are the correct size for a 470 low deck or 512 or a 383 stroked to 498 cid. These are used rods that my machinist said are all good. Im looking to trade for a set of aftermarket rods...

The stroker motor swap is well under way and im in need of couple things to keep me moving and maybe a member here can help me out. 1.Im looking for some header flanges that will work with 440-1 heads they must be atleast 3/8 thick, stainless or mild steel 2.arp or Manley head studs must have...

As most of you are aware i decided to change my 62 valiant from a turbo slant six to a boosted stroker big block. Ive sold off all the small parts and have just the turbo setup left 1.stainless steel thick wall turbo header with 1/2 header flanges. 2.390 hp e85 blow thru carb with vent tube...

Im looking for a early a body v8 drag or center link i hoping to pay about fifty bucks for one if anyone has one they dont need or need the fifty bucks pm me shipping would be to 49234 paypal perfered. Im about to start my mock up process for my valiant and i cant start till i get one in place...

Im looking for a unmolested Rb B1 intake manifold for a deal im working on if any member has one that is collecting dust and may want to get rid of it please pm me shipping would be to 49234 Aaron

Im cleaning up some of my unused parts and i have a pair of small block turbo logs with a T4 plenum that has a 38mm watsegate flange the parts were on a 92 Dakota and should work for any small block fyi there may need to be some small modification for your project but this setup should get a...

I have a set of used slant six crank scrapers with low miles under 1000 since install im looking for $150 plus shipping scrapers are located 49234

I have a set of arp head and main studs with lock nuts and bolts lightly used with less then 1000 miles since installation id like to get 75 plus shipping studs are located in 49234

As you all no ive decide to go a different direction with my valiant and decided to sell my slant six stuff. I have my ported and polished slant cyclinder head with 340 springs and large stainless valves and hardend seats up for sale the head has low hours since being assembled and is a work of...

Im selling my holley 390hp blow thru carb with vent tube extension this was setup by eric at horsepower invitations and has his 3rd circuit design for more fuel at higher boost levels. This is a great carb and has worked out good for my slant turbo car. $700 plus shipping carb is located 49234...

Ok basically I scored a set of Indy 440-1 heads and decided to build w new power plant of my valiant. Im building a 500 cid low deck storker motor topped with the indy heads and indy 400 4150 intake. My plans are to convert the intake over to efi im in the process of sourcing the parts now and...

Like the title states im in need 14mm fuel injector step drill bit msd #2160 or one like this http://pages.ebay.com/link/?nav=item.view&id=260700473724&alt=web If any member has one and wants to get rid of it or if someone knows where I can find one cheaper then the ebay link please help a...

I know this topic has been beat to death but ive used the search button but I just can't seam to find what im looking for.. what other options are available beside the afco 3850m? Do they make a single adjustable version of this coilover? What are you guys running for a QA1or other brands and...

Im looking to build a low deck stoker motor and have a chance to buy a new old stock 4.15 stroke direct connection part number p4529532 crankshaft. I was wondering about the quality of the cranks back in 1991 too the newer stuff? Also what would a good price be for this crankshaft? Any and all...

Well the time has come and i hate to do it but I think Ive made the decision to pull the slant turbo motor out of the valiant and upgrade to a new power plant , so ill be saleing off the All the performance parts off this motor too fund my next project. All parts are located at 49234 and i...

Here's a couple pics of some headers I found that are supposed to be under chassis headers. They look like some headmen B body headers but 3,7 tube are bent alittle different. What do you guys think are these Bob mazzolini under chassis headers I've tired to find some pics on the web but haven't...

I'm looking for a set of roller rockers for a set of indy 440-1 Heads, indy,harland sharp, jesel let me no what you got I'm also in need of a low deck indy valley pan preferably a two piece but ill entertain a one piece and arp head studs for these heads Also a indy 400-1 single plan intake...

I'm looking for a set of /6 to big block motor mounts for the early A shipping would be to 49234 and i prefer paypal .. Thanks

I'd like to give a shout out to FABO members, member Treblig is a great guy and easy to deal with Thanks again Gil for working with me.... Aaron

I'm looking to clean out the extra parts I have that I won't use parts are located in Michigan 49234 I have two complete slant six one barrel intake and exhaust manifolds with all the throttle linkages and choke stove one is from a early 70 slant and the other is a mid 70 with the emissions...

I have been kicking around the idea of converting a 68 notchback, to a convertible and was wondering what allparts and pieces would I need to make this transformation? Has anyone attempted a task like this, if so please come pics and insight would very much be appreciated Thanks aaron

I'm looking for a set of 8 3/4 bbp a body axles with bearings shipping would be too 49234 I no i can buy new one's from doc diff but im on a budget and would like too see what's available Thanks aaron

Heres a link to classic2current products there located in Redford mich and I was thinking about placing a order for one of the barracuda projects II'm currently working on, there prices look fair what's the opinion on this site of the products...

I'm in need of a A body floor pan for a barracuda im working on I need from the firewall seam to under the rear seat seam its for a console car. My trans tunnel is good so if need be we could cut the floor pan in half to ship. Shipping would be to 49234 Clarklake mich Thanks FABO Aaron