Search results for query: *

I've had my 69 Barracuda for 27 years. I've registered it in the MoPar Mod/Floral Top/Interior Registry. My car and story is #153 in the registry. From early on, I knew that it was part of the Mod Top family. I recently learned that it's 1 of 937, then I learned that my car could be one of only...

I had to park my Cuda for a couple of years. I would occasionally start it and let it run for a while. I had to move my car to another space. When I tried to start it, it was backfiring thru the carburetor and exhaust. It would barely stay running. I checked points, plugs and wires, all good...

Mopar Carter Thermo-Quad Carburetor 9109S 800cfm - 1978-1979. Primarily used on the Dodge Lil' Red Express trucks. The numbers below the part number on the front are 1867. The name and numbers on the top are Carter Thermo-Quad 6-2363. It needs a good clean up and rebuild. $99 or best offer...

Available from 68 to 71. The Redline hub caps are Aluminum originals. They have no dings or dents, just a few minor surface scuffs. All original paint. Asking $350.00 or best offer. These are located in Washington, DC.

Our Father started a resto-mod on the Dart but passed away before he could finish it. It is roughly 75% completed. This car is part of an estate. What we currently know about the car - The car was a slant 6. There is a newly rebuilt 383 - 30 over with high flow heads. There is a 727-B trans...

Our Father started a resto-mod on the Dart years ago. Unfortunately, he passed away before he could finish it. It is roughly 75% completed. This car is part of an estate. What we currently know about the car - The car was a slant 6. There is a newly rebuilt 383 - 30 over with high flow heads...

Up for sale is my 69 Barracuda, The Killer Fish. This car started its life on a farm in Fla. with Ivy Green paint, Green and Yellow Mod interior and Ivy Green vinyl top. As rare as that combination is, I just couldn't restore it to its original look. This car was stored in a barn for most of...

This unit is for a Mopar 8 3/4" rear 1964 - 1972. The case is numbered 2070741 X. The 3:23-1 open gears turn freely. Nice and clean and no chipped teeth. It comes with the pinion snubber. Located in Downtown Wash DC. $99.00 or O.B.O. Pick up only.

This unit is for a Mopar 8 3/4" rear 1964 - 1972. The case is numbered 2070741 X. The 3:23-1 open gears turn freely. Nice and clean and no chipped teeth. It comes with the pinion snubber. Located in Downtown Wash DC. $99.00. Pick up only.

I rarely use the wipers but recently I got caught in a little rain. When I got home, the wipers won't drop to the park position. Anybody have any ideas of what is wrong?

I am looking for a good power steering gearbox to replace the worn out one in my 69 Barracuda. Any help would be appreciated.

I am wondering if anyone sells just the smaller upper box frame insert that has the tough rubber triangular shaped snubbers. Holes through the sq tubing allow for a locking pin to keep it adjusted. The upper sq tubing slips into the lower box sq. tube. This whole assembly bolts into the top off...

I have been toying with the idea for quite a while about adding the hood scoops that were designed for 69. The scoops were positioned at the back end of 2 very wide Black stripes for the hood that started at the nose and ended just for the cowl. I already have the hood stripes applied. My...

2 bucket seat hinge end caps, new, still in plastic bag. Bought for a project and never used. Made by Dashtops by Palco part #90. Bucket Seat End Caps fits 1968 - 1969 Dodge Dart, Demon, Sport, Swinger, Charger, Coronet, R/T & Super Bee - Plymouth Duster, Scamp, Valiant, Belvedere, GTX...

A set of original 1969 Plymouth Barracuda parking lamp / turn signals. The housings are in excellent condition. The inner reflective surfaces are in really good condition too. The bezels are OEM pieces, not reproductions. The wiring pigtails are crimped blade connectors and not original. The...

When I start my Cuda, After very many cranking attempts, It finally starts. After turning it off and it sits cold for a while, the gas has already dropped down through line and the same process begins again. Is there some sort of advice or device about how to keep the gas from exiting down the...

Due to unexpected circumstances, my car wound up parked in my garage for several years. Needless to say, the old gas really screwed my carb. It is a Edelbrock 1405. I have never rebuilt a carb before. I ordered the rebuild kit. I removed the carb and took it apart. I then submersed the pieces in...

A set of OEM 69 Cuda tail light lenses. They are NOS but do not come in Mopar boxes. The part numbers are cast into the vertical edge where the lense meets the trunk finish panel. They are in like new condition. Ships from Wash. D.C. Asking $240 or O.B.O. Drivers - 2930243 30503 210812 11579 -...

A set of OEM 69 Cuda taillight lenses. They are NOS, not reproductions, but they do not come in Mopar boxes. The part numbers are cast into the vertical edge where the lense meets the trunk finish panel. They are in like new condition, never been installed. Ships from Wash. D.C. Asking $250 with...

A set of dual wired fender mount / hood mounted turn signals for Dodge Chrysler Plymouth. They measure 1" wide, 1 3/4" long and are 3/4" tall. The lenses are great condition. The chrome is good with the exception of 2 very small pit spots on the rear of one of the lights. No stock wiring...

Drivers side parking lamp / turn signal for a 1969 Plymouth Barracuda. Housing is in excellent condition and has the original stock pigtail wiring connector. The chrome bezel is in very good condition with the exception of three very tiny bubbles on the underside. The inner reflective surface...

A set of original 1969 Plymouth Barracuda parking lamp / turn signals. The housings are in excellent condition. The inner reflective surfaces are in really good condition too. The bezels are OEM pieces, not reproductions. The wiring pigtails are crimped blade connectors and not original. The...

Heater & a/c control unit from a 69 Cuda. Ships from Wash DC. Asking $25 + s/h. 3 vacuum ports broken.

Hey guys, I just replaced my gas tank sending unit in my 69 Cuda last weekend. The new unit works, it is a nice feeling knowing how much gas you have in your tank! Filled it up and went to a show last weekend, no problems. Which, brings me to the problem. Went out today to get my car ready for...

I am helping my father in removing the slant 6 and 904 trans in his 71 Dart. We have not separated the trans yet and thought it might come out a little easier if connected. We have a large engine hoist with an adjustable load leveler. As the slant six is "Slanting to the Left" what would be a...

Is there a similar site like this for Lil Red Express owners?

A pair of used reverse / back-up light bezels for a 1969 Barracuda. No dents and no pitting. Chrome looks good with just some minor very small bubbling, nothing major. The interior surface looks dis-colored. Good driver quality. I am asking $75.00 + s & h.

I need a nice new looking chrome bumber for my 69 Barracuda. 67 - 69 front or back will interchange. No pitting, rust or dents and no holes for bumperettes. I am willing to trade my 69 Barracuda parking / turn signals for the bumper. They are in excellent condition and need nothing. Let me know...

Left hand drivers side remote mirror. It is an OEM part, not a repro. The part number is stamped on the underside of the mount. The part # is 2802 301 46050 (Pentastar) CC1. The mirror itself is in good condition. No chips, cracks or silver flaking. The chrome housing actually looks much much...

Mopar small block single point distributor. Pulled from a running 1969 A-body. Shaft moves very freely. The part number is 2875 342 24 7. There is also the number 46 stamped in 2 places into the housing. Length of the distributor from shaft end to end is 10". The bottom exposed end of the shaft...