Search results for query: *

Has anyone on here had experience with AlloyWorks radiators? 3 Row Radiator Fan Thermostat For 1964 Dodge Dart Mopar/Plymouth Valiant L6 V8 I am looking for a new radiator for my 64 Valiant that I am currently installing a magnum 5.2 in, the car originally had a SL6. The car has A/C and...

Let’s start with this is not my first HEI swap I have done 2 others successfully on slant six cars. I have searched a few hours a couple days now and don’t think I am finding the correct part I am looking for if it even exists. I am looking for female plugs(sockets, connectors) for both sides...

I have a new set never installed in original box from Hughes Engines, H1110 Valve spring set. I decided not to use in my magnum swap. $95 Shipped to you in the USA via USPS.

Ok so this may be a dumb question but I have a complete LA engine seal kit from a project that got scraped, I now have a magnum 5.2L. Are rear main seals the same? Can I use head gaskets from this kit? I understand the timing cover, oil filter housing, water pump gaskets are the same, and I...

I found a old Wolverines Cams labeled CS762 I believe it to be a hydraulic roller long snout cam but do not have any specs. Can anyone help? From some looking on the web I think blue racer cams bought wolverine and then federal mogul took over, but I can’t seem to find specs on FMs site.

I have a new set never installed in original box from Hughes Engines, H1110 Valve spring set. I decided not to use in my magnum swap. I have figured out shipping and $108 gets the springs shipped to you USPS insured with tracking. This is still cheaper than buying from Hughes. I would consider...

The balancer is off a 95 5.2L out of a RAM, the pulley is off a industrial LA318 from a 70s dump truck, no matter how I turn the pulley I can only get 5 out of the 6 bolt holes to line up. Is this common? I am thinking just slot the hole to make it large enough for the bolt to work.

Brand new in the package Edelbrock Thermoquad Carburetor Adapter #2696. $20 plus shipping Summit Racing 2.5”x2.5”x18” Glasspack Brand new in original box, $12 plus shipping

I have a new set never installed in original box form Hughes Engines, H1110 Valve spring set. I decided not to use in my magnum swap. Edit!!!! I was asking $100 plus shipping. I have figured out shipping and $108 gets the springs shipped to you USPS insured with tracking. This is still cheaper...

Can this plastic piece at the bottom of the distributor be replaced? If so where can I find one?

I have a 64 valiant that was a /6 car. I am installing a 5.2L magnum with crosswind intake manifold and carter AFB carb, I will be using 70’s passenger car front accessories, stock magnum camshaft. I am trying to decide on what fuel system to use. I have a new in box mechanical fuel pump, I have...

Just curious what kind of power could I expect from my 95 5.2 magnum, stock heads, cam, Hughes Hug1110 valve springs, mopar electronic distributor with gm hei, professional products crosswind 4v manifold, Carter AFB 600cfm, 340 exhaust manifolds 2.25” into a y to a single 3” exhaust. The...

Would anyone have the 273 V8 mount brackets or blue print or drawings of the brackets. Schumacher has been out of stock for awhile now. If I had the measurements I will just fabricate them myself.

I am looking for an early Abody V8 motor mount brackets. I have a 64 valiant and installing a 5.2L magnum in it. Would also be interested in a v8 centerlink if the price is right. As for the motor mount brackets, I know I can buy the mounts new from Schumacher but they have been out of stock...

Small block V8, Early Abody 4 Speed Bellhousing. Cast Iron for 9.5” clutch. All bolt holes are in good shape. I do not have the covers. What you see in the picture is what you get. Has light surface rust has been in AZ storage for 20+ years. Asking $100 buyer pays shipping from 85747.

Brand new in original packaging. Hughes Whiplash Cam plus lifters. I bought this as a set and never got to use, now going a different route. $250 shipped to you in the USA. Will also consider trade for 4bbl manifold for Magnum heads, Early Abody V8 centerlink and motor mount brackets, or Abody...

I have a 70 318 block at the machine shop now with #675 small valve heads, the are just freshening up the block and heads, new bearings are being installed. I told the engine builder I have the Hughes 318 Whiplash camshaft and showed him the specs. He said that for my setup I will have to switch...

I am curious if anyone knows the taper angle on our A-body idler arm and pitman arm is? I am going to rework a slant-6 center link in my early A.

Slant six performance built head is shaved .080" fully rebuilt has (engnbldr) oversized stainless steel performance valves the head size for these are intakes, 1.70" exhaust is 1.440" these valves have stock stem diameter and length. New Bronze Guides Installed. Has Erson performance...

Slant six performance built head is shaved .080" fully rebuilt has (engnbldr) oversized stainless steel performance valves the head size for these are intakes, 1.70" exhaust is 1.440" these valves have stock stem diameter and length. New Bronze Guides Installed. Has Erson performance...

I have a Early A-Body 4 speed Small Block Bell Housing. $200

The head is shaved .080" fully rebuilt has engine builder valves, erson springs, ported and polished and has performance coatings on the valves combustion chamber and runners. I have $1200 into the head will sale for $850. Has never been installed since rebuilt. Erson Pushrods NEW in box...

Has anyone ever used truck manifolds on a 318 swap in to a early A? 64 Valiant to to be exact no power steering. The engine is sitting on the stand right now so I can't get an idea of what clearances I have.

I am looking for a Early A-Body V8 Center Link and Motor Mounts for a SBM in a Early A-Body. Build is on a Tight Budget and looking to see if any one has these parts Before I have to order or modify my Slant six stuff. Shipping is Tucson AZ 85710.

I am looking for an Abody 318 4 speed bell housing with inspection cover, clutch fork and 10.5" flywheel.

I am sure this info is already posted but have not found it yet. What parts are interchangeable on a 3 speed bell housing to a 4 speed bell housing. inspection covers? clutch fork? anything else i am missing?