Search results for query: *

On each of our new aluminum radiators, we use RMI-21, distilled water and a sacrificial anode. (Same for any motor with aluminum heads.) Keeps passages & components super-clean w/o any crud build-up anywhere. :)

NOTE: Addressed to no person, personally If the cost difference of the 2 intakes was that crucial to the family budget, I most certainly would not be in this particular "hobby". As long as I am though, I did not serve years in the US military to now be voluntarily using Chi-Com...

Thank you all for each of your responses! :) Got 'em here from this thread, and they both are on the way already. Will be needing more items you might have laying around later, & will continue to check here FIRST. :) +++++++++++++++++++++++++++++++++++++++++++++++++++++++ P.S...

You will want a HD relay/junction between the alternator & battery. www.dbelectrical.com makes a really nice one, comes totally complete. HTH --- :)

STARTERS --- ALTERNATORS --- RELAYS ---CABLES = D. B. Electrical To get great tech, and accurate answers + professional service & products, you can not find finer people or prices than DB Electrical in Tennessee. www.dbelectrical.com <-----50-plus purchases, ZERO issues. The Best...

Bronze & Copper have been beaten to death by ALL brands/customs the past 5-6 years, every where you look. It'd have to be MANGO from the choices provided. It's a very "happy" color, with very good vibes, that catches your eye & creates a smile, unlike darker colors that carry funeral...

Thanks, fellows...and here's another source! Wheel Vintiques makes a 15"x6" Mopar Rallye, 83.95 each @ Summit. HTH :)

Is anyone making a factory-look repro 15"X6" Rallye? All I'm finding are at least 7" wide, so far. Appreciate your help!! :)

Thanks!! :) Never knew the 5-Spoke Magnum lug nuts were the same as the Rallyes. Will get them on their way this week. (Wish someone made Rallyes in a 15X6 size...all seem to be at least 7" wide.)

AFCO makes a nice affordable 26" aluminum rad, highly impressed with their prices and products. --------------------------------------------------------------- If you're maybe thinking about getting a custom unit: The "ideal rad" for a high-performance small-block (including 406/408...

1971 225c.i. Slant/6 40-thousand miles, Automatic ====================================== Typical common slant/6 problem...fuel line percolation, vapor lock, hard re-starting, etc. It's a total bummer sitting 30-45 minutes to re-start after warm shut-off. Have done the "extended tip...

Every original factory Rally Wheel lugnut here is rusted, w/its chrome damaged. Does any one know a source for a nice repro of the factory-style chrome lugnut used on the Mopar Rally Wheels? Thanks greatly!! :)

Fellows, We need two good dipsticks, for 904 or 727 trans. (No local junkyards here.) If you've got one, or two, in good condition please send PM w/cost. Hope I can help you one day, and thanks greatly!

A Pertronix Ignitor III installed in your distributor is a great "bang-for-the-buck" modification, along with MSD 8.8 wires, & a Pertronix coil. Forget the magic plugs. HTH 8)

Check out the numbers on the Eddy RPMs @ link below. Very affordable, compared to most. Featured in Engine Masters several times, including one set w/W2 style mods dynoed @ 600+ h.p. They're doing our set, along with the Eddy AirGap intake...

Yep, the MP unit was the ticket!! :) Mancini adj. MC pushrods must come with 1000 shares of Chrysler stock, eh? =P~

How about $609.00 for the pair... both front AND rear triple-chrome plated and...brand new! No cores needed! http://www.varkmotors.com/71-2-Duster-FrontRear-Set-Rear-Bumper-_p_88295.html

Yup!! Firm Feel (#3 box) and their quick ratio pitman, with 1 1/8" (front) 7/8" (rear) sway bars. All rockin', without the roll!!

Wheelvintiques.com has them in 3 different sizes/styles for the 15" wheel. If you're wanting to buy a used pair, you'll still need to specify the width & offset of your wheels, in order to not get some that do not fit, or do not look right. Another choice you'll need to specify is...

Do they do anything besides motorcycle components? At 125.00 for chroming a motorcycle oil tank, their prices for a Duster front or rear bumper could get pretty pricey, quick. We're planning on dropping them off & picking them up, and willing to drive anywhere within a 500-mile radius...

Am sure everyone's familiar with the *offset* MC adapters for A-bodies to be used when installing the later model aluminum MCs. (Not to be confused with the much more common non-offset adapter/spacer allowing use of the later MCs) It was originally made to allow more VC clearance on Hemi...

1971 Duster (Already have the '73-up Wilwood calipers & brake lines) Where's the best place to buy all the (new) '73-up front-end suspension parts (UCAs, etc.) required for the front-disc big-rotor (11.75") conversion? This will be a major help & *thanks* in...

Like nitroglycerine!! And that "ticking" is the lil' alarm clock ticking away the seconds before it blows!! (j/k)

Neat work! Gonna do more?

Nice to see no cowl rust around the MC! Have fun while bringing-it-back to the highway.

And here's a schweeeeeeeeet lil' upgrade for the millions of /6s!! HTH http://www.arengineering.com/alternatorbracket/slantsix_bracket/slantsixbracket.html

Terrific how-to and part number info on the link provided below. AR builds/supplies most of the adaptor/brackets everyone else sells. Great company & nice folks to deal with! (They're also the source of the brake adapters.) HTH...

Mobil 1 gear lube & a bottle of either Lucas or GM friction-modifier. HTH

Is there a redline version?

Has any one ever checked to see "hands-on" whether or not the hinged gas cap assembly from a Dodge Challenger would fit without any big-time body work? Always wanted to know! (The next time we're at Year One in person, we'll carry one out to the parking lot and "eyeball" what would...