Search results for query: *

Hello! Can someone help me identify this shifter and shifter handle, what car did it come from, is it a console handle? The transmission has no vin on the side but has what looks to be a date on the side near the front that reads 5-23-66 I am planning on instilling this transmission into my 73...

I feel like there might be something wrong. But I dont know if it's just running rich, wrong timing, bad intake gasket, bad head gasket, or all of the above.

I have a 73 duster with a 360 and a 727 with some aftermarket slapstick shifter. When i got the car the kickdown lever was not connected to the carb and there for not in use but the car had not been driven for at least 3 years. When I switched the intake and carb I removed the lever completely...

Hello! I am fixing up the front suspension and steering in my 1973 Duster 340. I have two pairs or torsion bars. One set is the one that was in my Duster and the other set i got from a guy who repaced the torsion bars from his 73' Duster 318. Im not sure but i think he said he replaced his...

I am rebuilding the front suspesion in 73 Duster. I just removed the strut rods to replce the bushings and noticed that they have a slight bend and the ends. Is this bad? Do they need to be replaced? If so where can i get a good set. Thanks.

I have two extra control arms that i was going to install new bushings and pivot shafts. Fo i just press the pins out with a press? Is there something i need to do before? Also i took a closer look at them and noticed they are a bit differant. It looks like one has sone sort of reenforcement...

Pretty simple question i think 1. How much are complete 340 engines worh. How much are you guys in the US paying for them that is. 2. Same question for a complete engine but has no intake or exhust manifolds. Assumin the engine is a 71 -73 allthough im not sure.

I was just wondering i the a bodies had any special mounting brackets for bucket seats. my 1973 Duster 340 was a factory bench seat car but has had bucket seats installed instaid and they were just bolted right through the floor with big spacers. is there any "corrcet" brackets i can get and...

------ Ok first off this is not a mopar engine but im sort of practicing with an old lada 4 banger before i ever even think of rebuilding a mopar v8. So i thought i would just ask you guys since i dont really know any other forum. ----- I just finished puting together a small 4 cylinder engine...

If anyone could help me and answere the question i have for this Rpm intake manifold it would be greatly appreciated :D

Simple question. Need to replace front suspension and steering in a 73 Duster. What do you guys think about FirmFeel suspension.

So here is the deal. I have a 73 duster with a 78 360 (wich i think is pretty stock) and a 727. It currently has a Torker 340 intake and a Holley 650 DP wich i suspect has too large jets. I am thinking to buy a new intake manifold and i have my eye on the Edelbrock performer and the Edelbrock...

What can you tell me about thiese heads and rockers?

So i have a 1973 Duster that has a 78 360 motor. Has been rebuil before but i dont know what has been done to it. Anyway. I need to changed the headers on it because they are rusty and i know of 2 holes on it. But worst is that they hit some part of the steering mechanism (not sure what)...

I removed the rear tires under my '73 340 Duster to take a look at the break drums and if i could spot any rust. When i removed the drum i noticed that the rear axle thing (not native english not sure of the word) wiggled in and out. Is this suppost to wiggle that much? Or at all? How do i fix...

Hello :D I own a 1973 plymouth duster 340. It was painted about 10 - 15 years ago and the fendertag was lost in the process. I have the production sheet for the car (found under the back seats) and i wish to reconstruct a fendertag and a new brodcast sheet that i can use to refrance so the...

I have a 1973 340 4-speed plymouth duster that has been repainted once that i know of. During that paint job the fendertag was unfortunatly removed and never put back. I pulled the back seat looking for a build sheet but only found a tiny quarner of it. Someone got it before me :/ I did...

I have a 1973 plymouth duster with a 360. It has an edelbrock torker 340 intake manifold on it and a holley 4-barrel 650 cfm double pumper. Is this any good? Should i try to replace the manifold?

I was just wondering if this speedometer is in mph or kph. I feel like it is in km since 200 kph is 120 mph like it normaly has but i just want to be sure. Its in a 1973 duster 340.

I have a 1973 340 Duster. The headliner that is currently in it looks just like painted black fiberglass and does not looks good at all. i would like to replace it with a soft headliner. So my questions are what were the factory headliner options for the 73 model Duster and where could i get my...

So i have a 1973 Duster that was originaly a 340 4-speed. unfortunately at some point in its life the engine froze and it cracked the 340 block. now it has a 360 out of a 1980's Ram with the 73 heads on it. i'm just wondering if and what 340 heads change on the 360. does it increase...