Search results for query: *

I need a driver side door latch for my 69 Dart, I had bought one a while back and just ready to install and it is no good - I can get picts of what I need if it will help, Thanks,

Throwing in the towel - having trouble with the door lock rod on the blue mutt - 69 Dart passenger door - other than a little adjustment and everything sort of worn my passneger door locked/unlocked fine - but I decided to take everything out and replace the plastic clips, door handles, lock...

Holley 750 Near New 0-4779SAE Decided I will be going a different direction for carb setup. I bought this carb a couple of years ago, when I put it on my car I assumed that the linkage was the same as my 670 I had on it briefly but it was different which kept me from getting the carb to idle...

I am looking for the lock rod, it is the one that has two rods on a bracket that pivots, one rod goes up through top of door for the knob, the other rod connects to the latch assembly. I would like to see a picture before buying, I have bought two off here and they were both wrong. Thanks,

I have recently seen a decent looking 86 W250 for sale - want to look at it and trying to find some tech info but not having any luck with Google - anyone know a good source? It is listed it has the 360 but not many more details. I would like to know trans, axels, fuel tank size, etc. It could...

I think I have figure out the source of my woes but over the years have realized that once you peak at frustration its often easy to overlook some of what you know is right so I thought I would share some of my source of frustration to see if I have overlooked anything. my engine (to start)...

Looking for a throttle stud - shown in pict

I had an 05 Mustang several years ago, car ended up in 3 magazines and won many races and trophies, while googling around came across the old article from 2008 - just thought I would share. I bought the car to have something to mess around with with my son as well as a grocery getter - its long...

With my upgrade now to the Wilwood MC and the Wilwood proportioning valve the stock pressure switch will not work, it is different threads. The Wilwood prop valve comes with a switch to activate your brake lights but I haven't found enough info as to whether it would work as the idiot light, its...

pilled the rear seat out to get to the seatbelt bolts. I'm curious what the seats came out of, maybe the Mutt has one original part, google and the search button here didn't turn up anything rear seat bottom 3447760 D 8L Rear seat back 2858875-1 LSI M 18685

As everyone knows all info on the internet is 100% accurate, but just in case the one piece I am trying to find out thought I would ask and see if someone here knows for sure. My 69 Dart has a 72 360 installed, it had what looks like the solid Moroso mounts in it when I got it and some cheapo...

I am looking for a passenger side shock plate that matches this one I have for my driver side - shipping will be to 98036. will buy a set if price is right - would like a pict of the plate or plates - this is for the 8 1/4 rear I have in my 69 Dart

not mine Dodge 340 engine block - auto parts - by owner - vehicle automotive...

Since I have had to dig in a little deeper with my current block I have been doing more reading and looking at what potential I could get from my current setup, the one choke point is my stock heads, which could end up being ok for me, but who wants ok. So I starting looking at the different...

I have read lots of posts regarding header installs and ensuring the engine is centered and located properly. I noticed many small areas that can contribute to some grief and anguish that will have the dimensions out and will be checking as much as possible when I set the motor down and lock it...

When I got my 69 Dart it has a 68 drivers door and from the numbers I found a 70ish rally mirror. I bought a set of stock type mirrors and the holes in the door are off. I wanted to know if someone could give me any dimension I might be able to use to get the mirror in the right location before...

I need a new set of sill plates and wanted to see if there is a "best" place to get some repops, I have bought others before for different cars and ended up with some very cheap and flimsy trash. Any good ones out there? Don't want to buy these but once, my trash can is already full

I have spent quite a bit of time looking at radiators for my 69 Dart, the Cold Case had some pretty decent reviews but I was never able to find dimensions, well bought one anyway. I have had several Champion radiators, Summit, and a few other aluminum and good success with all but thought this...

I've ended up with some motor mounts that don't work for me, from more research they appear to be 318 mounts, look to be painted well or powder coated. 75.00 shipped to lower 48, will take paypal, add fees if not sent as gift or friend

I have a Lunati cam 10200702LK with lifters, cam was broike in, ran less than 50 miles, wasn't the best choice for my high compression pistons. I labeled and bagged each lifter with cylinder number and intake/exhaust so they can be installed back the way they were with the cam 145.00 shipped in...

I started pulling the springs off my J heads to finish some cleaning in prep for the new springs to match the cam I am about to put in, the new comp springs are a dual spring, the umbrella type valve stem seals don't appear right. Am I missing something, this is a new one for me, always had head...

I now know about the 360 in the Blue Mutt since I have removed the heads. I confirmed the pistons are the older TRW 11.5-1 and I have some factory "J" heads with the 2.02 valves. I don't really have the means (or knowledge) to determine where the motor is for final compression. Any thoughts...

I have searched with no luck, I am running the factory switch for my idiot light as well as another gauge, I have a TEE in the fitting but with the extra sensor it doesn't leave much room to get to the bottom of the distributor, is there another location on the 72 LA 360s to tap for a oil...

The Blue Mutt had another surprise for me again, this time with bushing for the rear leaf's. I am moving the leaf's back to the stock position, simple enough - NOOOOOOOOOOOO! I recently bough some parts from a few members here, the front hanger brackets I got were mismatched and also neither one...

I've been doing some searching but can't seem to find the answer Im looking for. My 69 Dart has a 360 with the 727 and a 8 1/4 rear, while under the car it looks like the yoke on the driveshaft should go into the transmission more, does anybody know what length the driveshaft should be or how...

Need a couple of parts for my drivers door on my 69 Dart 1st off, my drivers door is from a 68 - heres what I need: drivers side window regulator 68 Door latch and associated parts/rods/etc. I would like to convert the door to the 69 setup which has the door lock rod further to the front, if...

I am planning on the next round of fixes, upgrades, etc. for the Blue Mutt (69 Dart), since it has already had a mix of parts added I am wanting to find out about which parts to get, visually looking at something per a picture is dicey sometimes and I don't want to guess when I order some new...

Figured I would start a thread with some details about the 69 Dart I picked up a few months back, since I have had the car I decided to give it the title of The Blue Mutt, from the outside it looks like most any other 69 Dart GT less badging and trim but it is far from original or stock. Today I...

When I picked the blue mutt up it already had the rear leafs moved inward on the axle and the original mounts front and rear are gone. I hope to be able to find the stock mounts cheap to see what the springs look like in their original position. Let me know if anyone around has some. I do not...

The 69 Dart I bought a few months ago was originally a manual drum brake car all around, at some point it had the front swapped for a disk setup, don't like it much as they notched the lower control arm to give clearance to the brake hose, anyway here is a picture of some numbers on the caliper...