Search results for query: *

Need help went to napa for buying paint for my car the paint code is fc7 plum crazy purple they told me they cannot make anymore that paint , dupont no longer have the recepies to make it does someone can help me out dont tell me to go else where to buy it where i live there is not much...

does someone know the difference between in lower ball joint in early et later a body thanks Bob

Does it have a diference between the years in a body for hood hinges reason i ask is on my car 1971 duster i have 1974 hinges the bolt hold are slotted and the right one begin to be tired as i can say and i found an other set of hinges in my garbage stuff laying around but the bolt hold...

Need front left fender for my 1971 Duster Tell what you have Thanks Bob

hi I have a 2007 ram with noisy hemi bought a 2017 junkyard engine to replace the tired one knew I hade to replace the front covert to keep A C compressor in place but found out the crank reluctor arent the same either the 2007 have 32 teeths and the 2017 have 50 plus teeths so the pcm will...

what do you think about them does someone use them how do they flow what kind of intake and rockers bolt to them

already have an holley black electric fuel pump for the last 10 years dont have any problem with it but its noisy I dont know if Im getting old but for a quick and short ride in town its ok but a for a long ride with wife and kids its so loud and Im tired of it what do you guys suggest me...

wondering whats you are using as engine mount I have the qa1 cross member and was using the napa engine mount but they are so soft , the engine is bouncing around under the hood and Im affraid they gonna split apart so ... I know mancini racing and other are selling rod to avoid that but Im...

last night went for a ride whit the duster at first I notive the wideband gage was gouffy ( autometer 4379 ) AutoMeter Ultra-Lite Digital Gauges 4379 but the engine was cold and didnt let the time at the senser to heat up so didnt care much about it after maybe 20 minute of highway driving...

hang on its a long story few years ago I bought the upper control arm the K frame and strut rod from QA1 instal the upper control and the strut rod right away but let the K frame alone didnt have the time to replace it !! last winter I rebuilt my 408 so was the time to replace the k frame so...

I know its been discuss alote BUT I reinstal the front end of my duster with my new QA1 K frame but now the torsion bar key (the other part that adjust the suspention with bolt ) where the bolt adjust the suspention that key or adjuster when the car hit a bump it come in contact with the...

wanna buy new set of valve covert I love the look of the B1 alu valve covert but they dont seem to make something like that for small block Id looked at indy and they dont seem to do it either any idea ????

can you tell me how you hide those intake under your duster hood like said in an other treads I bought one and its very tall and wondering what are my option I know and saw they can be mill but would like to see other option

intake is to tall and the carb aint gonna fit under the hood so... need to milled my new intake I know indy say it can be milled but never did that and really dont wanna scrap this intake did you ever do that ? what was the end result ? pics ? the shop who do all the porting on my heads told...

wondering what are the heads stud you are using ?

needed 360-1 intake and 1.6 rockers hope you have something for me!!!

of course its the duster

auto meter air fuel meter was working great when remove , no senser with it 50$ plus shiping 2 sets of TTI W2 headers gaskets parts number hg24-340w2r they are 25.95$ at Mancini racing so 35$ for both plus shiping edelbrock Victor 340 intake little work have been done on it but nothing major...

was and still running an Holley black electrique pump for maybe the last 12 to 15 years never hade really a big problem with them with exception of a burn pump when the engine was idling for a long time now Im getting old and Im tired oof earing it what I run or have so far is half inch...

need parts number for rockers arm for the Indy Im buying they ll coming with there crapy rockers that I dont wanna use so... I know t&d but to much money and harland sharp maybe I know crane was making them whats the parts number??? thanks Bob ps need to be shaft oiled

can I run hollo push rod with them I could have acces to w9 heads and of course will need to use hollo push rod already running compcam 828-16 and was wondering if I could still use them thanks Bob

I wanna install a shield or blanket was suppose to instal t/brake but Im aint sure I wanna put the shifter on R and hold a bottom to be able to park the car in a parking lote its a street car but wanna be safe at the track with or with out T/BRAKE I have a stock floor and dont wanna cut...

still looking for those cnc ported if possible but other could bring interest thaks bob

like said in an other thread Im about to buy 1994 ram van Id called the dodge dealer in town and ask what is the dif the answer was a 4.10 gear and a 200milimeters dif I ask him what the hell it is and he couldnt answer me it look like a dana 60 but I know there is also a dana 70 that look...

Im about to buy a RAM van 2500 1994 with an automatic trans that the owner said its A518 dont have the cash to buy a gear vendors but maybe an od trans could help

I have this problem for the last few years but never was that bad Id replace the alternator for a 1 wire like this one Hughes Engines I went back to the shop that sold me this alternator asking if he could test it it end up ok atleast that what he is telling me with a multimeter if I connect...

looking for those if possible already ported I have w2 race heads and wanna go aluminum and faster to so let me know what you have thanks bob

I wanna replace my w2 heads for aluminium set looking to get w5 or the 360-1 or the 360-2 thanks

looking for a w5 heads set or the 360-1 wanna replace my w2 thanks bob

for sale old grill have few crack and need love 50$ demon Hood trim need love but clean nicely 50$ or make me an offer all parts are in Quebec Canada