Search results for query: *

My Car: 1967 Dart GT coupe Does anyone have a photo of the roof frame/support behind the sail panel? Specifically the lower 1/2 of it. I’m referring to the pillar area between the rear quarter window and the windshield. Previous owner did some cutting on mine in an unfinished repair. I’m...

Hey FABO. I’m repairing the rust damage in the trunk of my ‘67 Dart. Need to replace the areas in the photos. 1: the recessed area just forward of the spare tire well. 2: the recessed area just to the right of the spare tire well, and left of the bumper jack mount. This is a daily driver, so...

Hey FABO. I’ve got my rear end out to swap to an 8 3/4, so I decided to pull my gas tank and weld some patches into my trunk area while I’m at it. My ‘67 Dart is surprisingly solid through out, I’m pretty lucky. However the worst rust on the whole car seems to be in the trunk. I can easily...

Hello FABO. I just purchased used shock plates and U-bolts for a 8 3/4 rear from a member here. I have a quick question. I received 2 which are flat at the top of the “U” and two that are not. I know on my 7 1/4 rear, all the U bolts looked the same (flat on top). Will these work for the 8...

Hey FABO. So I pulled my old rear end out and am getting ready for a swap, 7 1/4 open to a 8 3/4 suregrip (3.73) in my 1967 Dart (318/904). After some FABO research, I wanted to clarify a few things that I’ve read on other posts. I know I need new shock plates and u-bolts. Is it correct I...

Hey FABO, I’m going to be putting a 8 3/4 rear into my ‘67 Dart and I need shock plates, u-bolts and hardware. Let me know if you have what I’m looking for. Would need to ship to OC area of CA unless local. Thanks!

Hey FABO. I’ve been working on my 1967 Dodge Dart GT for the last 10 months or so (many of you have helped me in my posts). Per some members recommendations I’ve decided to create a build thread. It’s just too much info for the photo garage. I purchased the Dart used in Southern California...

I have a pair of exhaust manifolds I removed from my 1967 Dodge Dart that I wanted to post incase anyone needs them. They worked great before I removed them. I do not see any damage or issues with them, they should clean up well. Heat riser appears to be present and functional. Also included...

I’m looking for an A-body 8 3/4 rear for my 1967 Dart project. I’m okay with a rebuildable one. The more complete the better, but let me know what you’ve got. I’m located in sunny southern California. Thanks FABO!

Hey FABO! Okay, I am trying to decide on tire size and wheel back space for my 1967 Dart GT (7 1/4 rear, front 10.95 discs and factory rear Drums, no leaf spring/fender mods). I know this gets asked a lot, I’ve read a ton of posts and learned a lot. Based on that, I’m thinking 215/65R15...

Car: 1967 Dodge Dart original 273/auto now a 318/auto. Power drum brakes/steering. I’m approaching the home stretch of my Doc Diff front disc brake conversion. I’m installing all new brake lines from Right Stuff (purchase from Classic Industries). The lines I pulled off the master cylinder...

Does anyone know what size/type of nut secures the lower control arm bumper stop? I know I used a 9/16ths thin wall deep socket to remove it before I lost it like an idiot. Any help would be appreciated. Thanks.

So while I had the center link out to install headers on my 1967 Dart, I decided it would be a good time to replace worn out front end components. I am a rookie at all this, so I wanted to run this by some more experienced minds. I’m looking at a Firm Feel '73-'76: H.P. kit; Urethane Bushings...

Has anyone here used rattle cans to touch up red interior on a ‘67 A body? I know Herb’s has a metallic red listed for 1964-1968. I just want to freshen up a few spots on my 1967 Dodge Dart GT. It’s a driver, not a show car… but a few spots are rough or faded (like the console). I’ll post a...

So I’m doing some work under the hood of my 1967 Dart GT 318/Auto (originally a 273). I apologize ahead of time for my lack of knowledge, this is my first Mopar. Is this the wrong fan shroud? It’s my understanding the ‘67 Dart fan shrouds were plastic not steel. The radiator looks like the...

Hey everyone. So I have a 1967 Dodge Dart GT hardtop 318/A904 that I’m fixing up to be my daily driver. This is my first Mopar, but not my first muscle car. Originally I was planning on redoing my completely worn out low back buckets with new foam/covers from Legendary. My only concerns are...

Hello everyone. As the title says, I’m new to FABO and wanted to introduce myself. I’m from the OC area of SoCal, a partially disabled US Army Veteran, and a big fan of classic muscle of all makes and models. I used to daily drive a muscle car when I was younger and recently acquired my first...

Hello everyone! I’m new to the forum and new to Mopars in general. I have a 1967 Dart GT project car a recently purchased. It has a red interior with red/white cloth and vinyl bucket seats. The pattern on them doesn’t look like other ‘67 Dart seats I see online. Can anyone confirm they are...