I have clean 65 cuda from texas! comes crate 360,904 trani,dana 60(410) mini tubed,cage(needs instlled)front and rear disk brakes,on and on and on,3,000 in summit reciepts alone call andy 330-322-9868 sacrifis 4,200$
yes ill pray for your father! but the prayers should be for you! to have someone like you in everyones life!hes in good hands!keep up the good work,ill pray for ypur strenght as well!..................gods will!
well first have you changed anything lately?I would work from cheapest to pricey!check u-joints for play,loose bolts,pinion bearing slop! thn check alignment of rearend(drive shaft straight left to right)the thing is drive shafts just dont become unbalanced,unless u changed them or lose a weight...
well iv done everything else on the whole project MYSELF!so i would learn(and that means the bad stuff too)howto!Cuz if im gona run this car a couple of years i better learn! done great on everything else!Im taken a break on the car for awhile, to get caught up on everything else!(WIFE SAID!)...
my 65 barracuda looks just like the one in your profile!(BUT NOTA WAGON) same colors and all! any clue if that was factory!thanks for the help!ill take any more!..................at the bottom theres a link on drive shaft alignment! it started out well and knowledgible then they turned into...
yes i did narrow it myself! when i say its off set! it means the yoke is not lined up with the tunnel (THE HUMP THAT CONNECTS THE FRONT TO THE REAR<WHERE THE DRIVE SHAFT AND TRANI RUN THREW!)it favors to the right! i have axles already cut! could i redo the housing, but reuse the axles(FLIPPED)...
ok im bilding a 65 barracuda bracket car.iv mini-tubed,spring relocated,etc.NOW i narrowed my dana 60 to 47 inches(PERFECT FIT IN THE WHEELWELLS). Heres my question? in doing a mock-up i have noticed the center of the housing is centered,BUT the pinion yoke is favored to thee drivers side 2" or...
i seen your car on here! from n.ohio! white, four speed,red interior, your car is really nice!diffently worth the ride to go see! just my two cents! bill!
sorry to be not much help but!that sure is a beatiful car!rule of thumb is something is worth only what some one is willing to pay!your only choice is are you that some one!there not making these anymore!(pricless) if it were me i would offer 3,500! cuz now it is his choice to get mad,laugh,or...
the high lite of my trip was we went to this stupid museum in ocala! abunch old old cars with no windshields no chrome and these funny longnoses! the seats were so far back the poor people were seating on the rearend(literlly) they had to put there legs over the axles and ur little buddy (family...
the race is awsome! the weather is great! goin big daddys museum tommorow! p.s. went to the musclecar museum in punta gorda fla. 150 cars and not one mopar! i want my ten bucks back!
leave for fla. tommorrow goin to gainesville friday to watch the nitro cars! now that should put a spark in my butt to work on the car when i get back! if you never had a chance to see em you should hard to exsplain the sound and feel of 9000 horses screamin by!
i mean the car of course!L.O.L well i have the same problem! my father-n-law was an X-drag racer!which my wife was raised on the track! daddys first car was a 69 gtx he bought brand new! named it hemi-X (yes it had a hemi in it which he bought for 800.00 outa junkyard in 1980) finally retiring...
thanks for your help makes me feel better! thats why i didnt weld them in yet waitn for good advise! movn the boxes back til wheel is centered in wheel well its hard to do with just tape meas. alone! man it loks bad a$$ tho!
ok 65 cuda minitube,spring relocation,dana setting up for track! question is i have the front boxes (front sackles) tack welded in! now i know right side of the car will sit higher do to arch of right hand spring! now the car is striped at the moment but its like 4" difference which i understand...
Of course what it goes for! But that looks very clean and complete!As lite as it is any smooth runing s.b.m. will make it fly!(cheaply)and best of all how stinkn rare them are! how many u seen! I SAY NO DOUT GO FOR IT! my 2cents!
ok! I found part number(72 chrysler E/B body!) it is CAST! more rounded.pictures are what i need the way it looks i could turn it 5 differents and it looks like it will work! the valve goes on the driver side but the valve bracket is on pasenger side! im going to try to send pitures!
i would go thru trunk lock on the rear! should be able to pop clip off the lock with butterknife thru trunk! if not that is the cheapest and easiest lock to replace NO?
I have 65 cuda singl master cyclinder! went with duel mas.disk brake conversion kit (power). the por. valve i got is cast! there are 5 ports! two 1/2" ports, Three 3/16! the 1/2" one on top i put to mas.the one on the back i cant match to any lines! the front line on pass.front doesnt match...
well i knew i could count on you guys! I just got off the phone with tom and just odered my basic kit (10 point) from S&W! Got some good advice on how to alter it to my likings! And great pictures of a sweet job off how to do it! but im still confused! (what the hell button did i push to make my...
i have 65 cuda i want to cage! i live 3miles from summit racing(yaaah)! they have cage kits! but only go back to 68'. now i know im going to be altering it cuz i want to go back thru the trunk! does any know measurements or if 68 kit will work with tweechn, mostly wandering about the main loop...