Search results for query: *

What can I use to stop moisture from forming in and around my 65 cuda? It is stored in a Shelter logic round top shelter. Had a good share of it last season. Thanks for any info.

I am installing a lokar shifter on a 1968 904 trans. The lokar has a switch with 2 wires and the stock has just one. How do i connect the lokar switch so the car will start. Thanks

Any ideas on how to fix tranny oil pan leak on my 904? I have changed the pan gasket 3 times and still leaks. What is better cork or rubber? What kind of sealant should I use, I have tried a lot of them. Just looking for suggestions Thanks, Stoke

Could someone measure where the penestar is located on right front fender of 65 Barracuda, Thanks

wanted used or info on where to buy, 65 barracuda 4 speed boot.

Does anyone know where I can get a boot for a 65 Barracuda 4speed? THANKS

Does anyone know where I should start to find the cause of the speedometer needle, on my 65 Barracuda, going nuts ? It goes all over the place, Just asking opinions before I jump into it. Thanks.

I need a diagrahm of the wiring for a windshield washer switch for a 65 Cuda. I have a complete wiring diagrahm already, but it doesn't have the washer switch on it. Being it was an option, I suppose. Any help will be appreciated, Thanks

Need a armrest pad for 65 barracuda. Preferrably black, but not necessary.Thanks

I need a front fender barracuda script for a 65 barracuda, Thanks

This is kinda of a stupid question, but what side of the exhaust gasket goes toward the block? The plain side or the silver side ? I got a set of felpros, for 318 Plymouth.

I read in a post awhile back that you should only use mopar power steering fluid. Does it really matter that much?

Could someone post a 65 barracuda wiring diagram? I misplaced mine and need it to straighten out my wiring. Thanks

How tight should the steering coupler be to the steering shaft, should it have any wiggle to it ? I cant seem to get it to be without movement I wouldnt think it should have any. But I dont know. You would think even a little movement would transfer to a lot at the steering wheel. Kind of a...

Where can I get the lower steering column seal stuff for a 65 Barracuda with power steering? Thanks

I got to replace my power steering box on my 65 cuda. I know that the firm feel and steer and gear are probably the best , but also are the most expensive. Has anyone else used a cheaper box such as from Napa or some other parts store. Or should I save up and buy the more expensive one? Is it...

Has anyone used them car storage bags that zip up and enclose the entire car? I was thinking on buying one and am wondering how well they work. Thanks

What was the size of the stock 65 barracuda 4 speed bellhousing? I am trying to work through. the maze of torque shafts and ball studs available. I take it is not a 10.5" bellhousing. The car originally was a 273 4 speed now is a 318 4 speed I bought car on e bay, and now am trying to uncobble...

Where are the I.D. numbers located on a 4 speed bellhousing that is on my 65 barrscuda. Could be a different one than stock because of the 318 engine. Thanks, Stoke

I need the location measurements of the front fender Commando v-8 emblem, on the front fenders of a 65 Barracuda. This is the large one with the word Commando attached. Thanks in advance, Stoke

Any tips on how to remove the heavy clutch pedal spring before I hurt myself? Thanks

How can i tell what my bellhousing is out of , such as v-8, six cylinder? Is there a number stamped somewhere I can reference to? My car is a 65 barracuda with 318 4-speed. I am having problems with the z-bar fitting properly Also would like to know if the forks are different from 6 to v-8. The...

What do I do to adjust shift points on a 904 tranny? Mine runs through gears way too fast , would like it to wind out a little more in the lower gears . Thanks, Stoke

Do'es anybody know a source for rocker moulding clips for a 65 barracuda? They are square plastic ones. Thanks.Stoke

I would like a pic of the inside of a 65 cuda trunk. I need to know how the jack and it's components are attached and where they are located. Thanks, Stoke

How many different types of trunk props were there for the 64-66 Barracuda. I have one that is spring loaded, with hooks on both ends, where does this hook up on the trunk and body? I bought my car on E-bay and it had no prop at all. Thanks, Stoke

I am looking for the two small front bumper brackets for a 65 Barracuda. These are ones on the far ends of the bumper. Thanks

Can someone give me the location of the Commando v8 emblem on the front fenders of a 65 cuda. I just need an idea of where to place them, because the fenders have no holes to go by. Thanks for any help.

Where should I start, to tighten loose steering on a 65 Cuda? It has power steering, 318 engine, 4 speed. It has a lot of play and is very squirrelly to drive. Thanks, Stoke

Hello , my name is Denny , live in Monroe, WI. Just bought a 65 Cuda, 4-speed,318. The cars I have are a 47 Desoto Convertible with 318 engine,38 Ford 2dr sedan with 350 chevy, and another 65 cuda in pretty rough shape, too many Wisconsin winters, took it's toll. Pretty much a Mopar guy my whole...