Search results for query: *

1974 dodge dart , all work done during 2008, 2009 and 2010 Body color is silver, interior is black, bucket seats, no back seat. Hood as a six pack type scoop installed, hood is black Engine: 1971 383 , steel crank, comp. ratio 9:1 ,engine had been rebuilt when I bought it in 1998 . Double...

booster has been sold, thanks

hi fellas, ive got an old 904 that i want to strip down and was wondering if any of the parts interchange with a 727 . Ive heard the valve bodies might. anyone know?

can you replace the bearing without tearing entire trans. down ?

this on a big block motor, i would like to change my stock setup that i modified to work with a hi rise manifold . i need some ideas or pics of what others use. i like the billet alum. type that bolt to the carb studs like the gm boys use but i havent see any that have both the throttle...

does anyone have a photo of the correct rocker arm scrub pattern of their valve tip. i know it was discussed not long ago but i cant find the thread. im ready now to work on rocker geomerty. thanks

hi fellas, im trying to get a set of adjustable rocker arms set up on a 383. ive got some heads that have been milled .060 and when i put it all together the rocker adjuster screws dont have any threads showing . i think ive seen posts that say there should be at least 2 threads showing...

i have a 74 dart i want to remove the whole a/c heater box. i see the studs and nuts sticking out of the firewall , they will be easy to get to since i have the engine out but is there anything under the dash that might be hard to get to or any hidden bolts? thanks

i need a carpet set for a 74 dart swinger in black . i cant afford too much so good used is what im after, worn is ok but not full of holes, coming apart etc. im in florida so shipping from the west coast might be too high for it to be worth it. thanks

i found one thanks for responding

im looking for 2 dart fender emblems , just the dart name that goes above the swinger emblem. i need 2 for a 74 , driver quality is fine. pm me if you can help.

does anyone know a way to test a 3 spd motor out of a 74? i bought a supposedly good used motor but cant get anything out of it, i ran an extra ground wire to it and still nothing. I checked voltage going to the bulkhead connector and only get 9 volts but still shouldnt it run but slower...

hi fellas, im looking into getting a set of new valve springs for a set of heads i want to put on a 383. the motor seems to have a slightly larger duration than stock cam in it but i looked at the cam before and i didnt see any numbers or markings so i dont really know what kind, lift, etc...

im looking for a single 383 ball and cup pushrod for adjustable rocker arms. if you can help please email me at: [email protected]. thanks, brent

i have 225/ 70/15s on the front now and these were just a trial fit and they rub when turning the wheel . they rub the lower fornt bottom fender . ive never driven the car yet since bb conversion, still getting it ready for the road. so im thinking i will go with 205/60/15 but before i buy...

hi fellas, i want to upgrade my alternator to a 100 amp due to the fact i have installed dual electric cooling fans and my present alter. cant keep the battery charged. at idle i can watch the voltage drop with the car running and the fans on. the alternator checked out fine at...

im in need of a iron adjustable big block rocker arm . either a crane or isky. a 1.5 to 1 ratio. the pic. shows which side i need. also i need a set of the nuts for the adj screws. im looking for a used one as this project is a low budget build. thanks

im in need of one mp, crane or isky iron adjustable rocker arm and 14 adjuster screw nuts for the same rockers. i need a 1.5 ratio. im including a pic of the rocker i need. i know there are lefts and rights. thanks send a pm if you can help or email me at [email protected]

i need a horn to be street legal. looks dont matter as long as it works email me at [email protected] thanks

im still looking for a drivers side rear marker lite lens for a 70 or 71 dart. i have the housing now only need a lens thanks email me directly at [email protected]

Low Price Hemi Plymouth Dodge Engine Cuda mopar 426(Hillsborough County) - $6300 (Hillsborough County) Reply to: [email protected] [Errors when replying to ads?] Date: 2009-05-06, 8:25AM EDT Ready to install, Dudek assembled, OEM Hemi engine Up for auction is a 1968...

i need a 71 dart rear (red) marker lite lens. it can be driver quality, i dont need a show piece., contact me by pm if you have one, thanks

could anyone give me the torque specs for the tierod ends , idler arm and pitman arm nuts . this is for a 74 dart , thanks

hi fellas, im trying to rebuild the calipers and its not a major job with just the one seal and the dust boot, but i cant seem to get the dust boot to go in. Is there a trick to it or am i doing it wrong. ive tried to put the boot in first , then put the piston in but the piston doesnt...

hi fellas in trying to make since of my wiring harness or whats left of it. when i bought this basket case last year the harnesses were in a 5 gallon pail. now that ive gotten a motor in place im trying to sort thru the engine harness. From what i can see, im missing the neutral safety sw...

hi fellas, ive just today gotten my 383 back to life after 5 years on the stand. still need to tune it , reroute wires etc. ive put 2 10" electric fans on the back side of the radiator to pull the air thru. they are supposed to only pull around 12 amps ea. well they must pull alot more or...

hi guys today im working on my project , my goal is to get the master cyl on and bled out. this is a rebuilt one. the car is a 74 dart with power disc brakes. ive mounted the master cyl. but not plumbed it in. i have made up 2 tubes to feed fluid back into the resevoirs . kinda of like...

hi guys, could someone with a 74 dart take a pic of the pass. side fender and shock mount area so i can see where the voltage reg. mounts . or better yet a pic of the voltage reg. and associated wires. mine is missing and so are the wires. thanks

is it worth it? http://orlando.craigslist.org/pts/968817601.html

hi fellas, i have a 74 that has had used quarter panels put on by the previous owner . i will enclose a pic of the hole in the panel and a pic of the marker lite . it seems the guy put different year panels on the car . if so what year uses these longer marker lites?