Search results for query: *

What is the best place to get exhaust pipes (manifold-muffler) stock manifolds with power steering and manual transmission. Anyone bought anything recently

Question my drivers bucket seat base is shot very bouncy. Is there a way to tighten it up or does the spring/frame need to be replaced. Has anyone purchased a frame or springs what’s available new or do I look for a good used one.

1B151499 PP2303343 0213 1=1971 B=HAMTRAMK 151499 =VIN PP230=3SPD 3343=SEPT 22 0213= 213th trans built that day Not sure I got that right and is there any way to tell what kind of car it came out of? Has a short tailshaft I’m guessing Abody

I recently put a 408 Stroker in my dart with a 4 spd trans. It keeps nocking my throw out bearing off the clutch fork. Has anyone experienced this can’t see anything wrong. But it happened twice not sure where to start?

I recently replaced my 727 auto for a A833 4spd hated driving the auto. So everything works as it should. But I have a vibration that was never there before. I rebuilt the transmission not my first time. New driveshaft custom made with new yoke and joints. The issue happens when I I drive or...

Have a 4spd trans missing pieces got it with a bunch of stuff. Just checking to see if anyone still has car.

Putting in an 833 4spd. car was a 727 auto will that driveshaft work? If not what do I look for length.

Has any one welded in a torque shaft/z bar bracket? If so how does it go and is a mig welder enough for this. Pictures if possible thanks

Looking for a 23 spline 25 tooth input shaft (4spd transmission)

Looking for a input shaft 23 spline 25 teeth on gear. For abody 4spd. Pm me Brian

Looking for a input shaft for an A833 4spd. 23 spline 25 tooth. Let me know what you have. Thanks Brian

Does anybody know what this fits 26 in radiator double core narrow tanks. Numbers on upper tank are 4016741 20446

Here is what I have. Stock exhaust manifolds (70 340) TTI down pipes, TTI X pipe, Had dynomax super turbos took them off and tried spintech sportman 3000. TTI over the axle tail pipes and TTI tips. The car sounds great from the outside. But inside it hurts your ears annoying resonating just...

I have a 1970 swinger with power steering. I was going to do the alignment when i noticed the steering wheel moves about 4 inches before the wheels move (car not Running) I tried to adjust it but it gets tight feeling (binding). My question is how much play is normal? I don't really notice it...

I have a 1974 360 that i put a lunati cam in (part#60402) 262 in 494 ex. I installed it a 0 I did not use a degree wheel or off set keys. When I started the car I used a timing light and set it to factory specs, the car ran ok but was sluggish. I advanced the timing and the car ran better each...

Get your mind out of the gutter this is a car forum. I was wondering if anybody else runs into this problem. I live in connecticut and its about 50 degrees today with unbelievable rain. when the temperature goes up after being so cold everything in my garage is soaking wet from moisture. I have...

I could use some help. When I was doing the body work on my car I decided to replace the passenger side door. It had mirror holes and I decided I would keep them because I liked the balanced look of a mirror on both sides. I didn't have the mirror an assumed the hole were good WRONG the holes...

Need to buy a complete exhaust, manifolds back. Looks like TTI has the best 2.5 system. Is there any discounts anywhere for tti directly or Mancini racing? Any help would be appreciated it's real expensive.

There is a ticking sound coming from my fuel pump. It kind of sounds like when a belt gets wet. I removed the belts and started the car the noise is still there. I removed the fuel pump every thing looks good no wear marks. I put it in a vise and pumped it manually no noise. The engine is a 360...

Took it for a spin today, ran good need to get a alignment.

I just installed my windshield. When I got the car the moldings where off so I have no idea how they go. There is a flap on the w/s gasket does the molding just lay against it or does it go into the moldings groove.

Before I scratch the crap out of the new paint job. Are there any tricks to putting the passenger side manifold in, I can't seem to get the heat riser between the engine and the inner fender. Do I jack up the engine?

Has anybody painted a 1970 dart grill? If so how do you tape off the black. Any good idea's or helpful hints.

Has anybody ever done a headliner in a 70 Dart? My question is the cardboard sail panel boards does the headliner get glued to it or are they there just to smooth out the headliner. I took them out but I can't remember.

I need to get both of my bumpers re-chromed. I have good bumpers but is it worth getting them re-chromed or use them as cores. I was given a price of $325 per bumper for swap he will meet me at Carlisle so there is no shipping. What did you use and how much. Thanks

The dart is purple again!!!! Thanks to Adam and the shop he works at my 70 swinger is plum crazy again. The car was painted on Wednesday and I just saw it for the first time tonight. It looks awesome. Adam and Kevin did a great job. The pictures will be coming soon the only one i have is now my...

I need two of these moldings they run along the top of the door and quarters then make a turn towards the roof. I'm just looking for the two curved pieces pictured one right one left. These are for a 1970 dart I'm sure other years are the same. Pm me if you have them.

Next step paint! Should be ready by the end of the month, get ready to make room Adam hear it comes. Sorry my pictures are fuzzy.

Does anybody know where to get kelsey hayes front caliper rebuild kits? I saw them for $15 a side and I can't find them now. year one has them for $35 a side. I need a few pistons and both seal kits.

Has anybody used this style manifold on a 70 dart with a 360? If so who makes a 2.5 inch exhaust system that bolts on. Do these manifolds flow as good as the 70 hp manifolds?