Search results for query: *

Hi folks. i am picking up a 72 4 door carts car> has a really nice floor and trunk. Anyway the trunkpan and inner 1/4's will work on a 74 2 door? Inner Wheel wells?

Hi folks, About to set the timing on my 318. How many degrees +/- do they like to run at "peak performance and still start well?

Hi folks, My drivers side sit a lot lower than the passenger side. Can I turn the bolts that sit in the lower control arm and pivot on the torsion bar? My plan is to max lift both sides and then lower to make sure both sides are equal. Turning which way lowers or lifts?

Hi folks, I have a holley 1850-3 that I am putting on my 318. Just wondering where my vacuum lines are vs fuel return Any help is greatly appreciated!

Will I be + or - for top rpm with this change? It's just on a 318 stock (74) with headers. I will be running a Holley 550cfm on top of the offy And yes I know the dual port is a very bottom end intake

Has anyone mounted hi beam lights behind their grill? Maybe mounted on the rad support. Anyone got pics? I have a set of hi intensity 6054's lying around and I was thinking that if I hid them behind the grill they would greatly help over the old school yellowish beams

anyone know where I can find new door panels for a 74 swinger?

So i type in my fender tag into one of those decoders..... http://www.mymopar.com/index.php?pid=87 It tells me 2 interesting things.... I have 1 of 70 code C15..... deluxe seatbelts lol and the E44 which says it has a 230hp 318 2 barrel G4B: 318 150HP(net) or 170HP(net) 1-2BBL 8 CYL 1974...

Hey folks, I have a question.... I am painting a hood matte black. should my base coat be a dull black or flat black before i spray the matte down?

Hey folks, I am going to be putting a matte black hood on my 74 swinger. My question is, should I paint the nose as well or leave it body colour(beige)?? Anyone have pics of a 73-76 with a matte/flat black hood?

I heard somewhere that magnum rockers are 1.6? True? Can you use them on a LA head?

Hey folks, Just pick up a six pack scoop for my 74. Question is does anyone have measurements as to exactly where it is supposed to sit between the front and the back of the hood?? Also does anyone have a picture of the inside of the hood?? I would like to know how much metal to cut...

Hey folks, I got a completely stock 318 2 barrel lying around and was thinking of using it for a couple of months ( not done my real motor yet lol) I was thinking of slapping on a intake and headers for cheap power. The carb I have is a 550 Holley. My intake choices are a stock 340 intake...

I am converting my 74 from a 318 to a 360. I have been told that the 318 mounts will not line up with the 360's. where can I find the proper mounts?

Myself I just pressed out my cam bearings with a socket, long extention and a hammer....... back yard style lol

A guy I know in my area is selling: Pair of Eddy aluminum 60779's, they are brand new, I remember when he bought them and he never used them. He also has a air gap, brand new, same deal. He is asking $900 for the heads and $175 for the air-gap. Summit sells the heads for $720 a piece...

OK block is for sure going to be blue as well as oil pan. Also i am going to use some M/T valve covers, headers are black, car is biege..... X-heads - blue or silver? timing cover - blue or silver? LD340 intake - blue or silver? Water pump - blue or silver? Brackets - blue or silver?

I have a cam in my garage that measures .468 on exhaust based on a 1.5 rocker ratio. Any guess as to what duration it would be?? No idea of the make of the cam. Looking for a ball park figure. Also any suggested CL's??

Here's what I have..... Block - 82 360 block, stock bore Crank - Stock stroke 360 cast crank Heads - X-heads, stock valves and springs, going to do a mild port and polish(gasket match) leaving valve stem and bowl area alone Pistons - stock flat top 360 pistons Intake - Eddy LD340 intake Carb...

What's the max compression ratio I can go with on 91 octane?? 91 is generally the best number around my area. I might find 94 from time to time, but I want to be able to drive my car without pinging. I should also mention I live around 700 ft above sea level and in the canadian prairies, car...

I know its not a A-body, but what would give me the best power/toque to mileage ratio for my truck? 2005 dakota 4.7L. Would an X pipe to dual mufflers or true dual be better for power and mileage? 4.7L is stock, small diameter headers, throttle body spacer, cold air, and might see one of...

I know its not a A-body, but what would be best for power/toque to economy for my truck? 2005 dakota 4.7L. Would an X pipe to dual mufflers or true dual be better for power and mileage? 4.7L is stock, small diameter headers, throttle body spacer, cold air, and might see one of those superchips.

Which is the better overall choice?? Considering if you were to dish the cash out for aluminum heads, you are probably shooting for 450hp +

I have a couple of "mystery" cams in my garage. I was wondering if there is any way to measure them or something to figure out what they are? I know for sure that they all fit small block mopars...... thats all I have!

Who make the best 6 point roll bar? Who sells the cheapest 6 point roll bar?

I am considering moving my leafs under the frame-rail. How much extra tire width will I end up getting? Currently I am sporting 255/60 15's. 275's rubbed a bit. Will I have to do a mini tub as well? if so can I get some step by steps on it? Thanks

I just picked up a 6-pac scoop for my 74 swinger. Just wondering how far from the back of the hood it should be placed??

I found a a eddy tr-5 (single ram) in my area in good usable condition. Just wondering if these intakes are worth any $$$?? what type of carb/cam do they work well with? I know its old technology, but thinking of getting it just cause I like the look of tunnel rams. Only if the value of these...

who makes a forged 3.79" crank?

Is Kijiji just as good as it is here for coming across cheap deals as it is in your city/area??? I am in winnipeg