Search results for query: *

Ok so I'm trying to dial in optimum ignition timing for my 340 setup, 9.5:1 compression, 360 j heads, 2.02, 1.60 valves, comp 268xe cam, edelbrock rpm intake, 670 holley, 6al mad and Mopar perf distributor. I recently had a little trouble out of my vaccum advance and while diagnosing it I...

Are any of you guys going to Mopars At The Beach next week in Myrtle Beach? I'm going to be taking my recently finished 76 Duster!

Is there a company that produces a clear side marker light lense for a 73-76 duster? I think it would be a clean look to have all clear marker light lenses with just the bulbs being amber and red.

I'm trying to install the 3 point seat belts back into my 76 duster but I don't quite understand how the rear retractor mounts behind the rear door panel. Could anyone possibly take a picture of the rear retractor installed so I can get in my mind how it mounts along with the plastic cover. Thanks

Plymouth Duster First Drive: https://youtu.be/Ot92wLndlmQ 340 Duster First Drive: https://youtu.be/jmKMA3ON3So First time driving my duster in 5 years! This is the first time it's moved under its own power since I bought it and then began tearing it apart for a complete restoration. There...

On my 76 plymouth duster, the clips that hold the chrome trim on around the windshield and back glass, are they removable with the glass in the car? Reason I ask is that right now the glass is out of the car and clips are installed, but some of the clips look like they may be to short to clip...

I have a 76 duster and I was looking at purchasing a reproduction antenna base and mast but it appears that the 75 to 76 year have a slightly different base and bezel than the 70 to 74 dusters. Is this correct? If so will a 70 to 74 antenna work fine anyways? I assume the 70 to 74 and 75 to 76...

Anyone going to the auto fair this Saturday?

I have a 76 duster and I bought the power window kit from electric life for 73-76 duster and dart. When installing I noticed my original regulator and window slide was completely different than in the instructions. After searching the Internet I found a few vague pictures that confirmed that...

My doors were stripped down and labled by my dad a couple years ago to be painted and neither of us remember how they go back together lol dose anyone have a parts breakdown or any pics and instructions to refresh our memorys lol Thanks

What bulb fits the heater controls on a 73-76 duster? Thanks

I'm curious to what this engine may put out and I'm not gonna be able to get to a dyno anytime soon so let me know ur estimate on this mild build! 1973 340 block 0.030 over, externally balanced cast crank with windage tray and stock rods with speed pro forged pistons, 360 J heads with 2.02 and...

I need a nice heater/ac control bezel for a 76 duster without the the wood grain. Mine is warped from years of sun damage and a few of the mounting studs are broken off. Send me some pics of what you have and the price for it. Thanks

Has anyone used the white face overlay for the 73-76 heater controls? I'm wondering how well the light shines through at night and if u remove the original or lay over it. Pics would be great if anyone has it in their car!

Im kicking around some ideas to build a low profile side exit exhaust for my duster when it gets road ready. Let's see what u guys have!

Does anyone know where I can find new chrome knobs for my heater\ac controls? If they are not being reproduced anywhere at this time I was going to try to make some out of chrome dice or use knobs out of a different car like a camaro that use a similar style and are readily available. Has...

Can anyone tell me what circuits run through the fuse panel? It's on a 76 Plymouth duster and I'm not sure if the wiring is the same for 73 and 74

I've been looking at buying some crystal/diamond cut clear headlights with the halo rings for accent lights and a modern look. I would love to see some pics of anyone that has put anything like this on their cars

I was wanting to add on some extra fused circuits for accessories and figured I could updated my old fuse box with atc style fuses that would also incorporate extra slots for a few more circuits while still using the factory wiring harness, unlike painless wiring where they send an entire...

Dose anyone know where i can get replacment chrome nobs for my ac/heater controls? This is the 73-76 abody style.

I'm looking for a good electric trunk latch reasonably priced

R aftermarket axles machined to fit the green bearings or do the tapered and green bearings have the same inner diameter so u can use either or on a standard pair of 8 3/4 axles?

Is anyone planning on attending the mopar week event? It's the first one ever and it sounds like the staff and sponsors are trying hard to make it take off and be a very large event! Hopefully as big as the mopar nationals! And what not a better place to host it then at one of the most poplar...

Hey guys I need some help on making a decision on what parts to get to finish up my suspension. What I'm looking for is a good handling street car that will handle curvey roads with minimum body roll but still have the comfort a softer suspension. I already have a slightly beaded up k frame and...

Post pics of your truck battery setup

Has anyone mounted their tach and gauges on the pillar? Post pics of your gauge pods and tach set ups

What's the best shop manual (printed or cd) that gives exploded veiws of every part, wiring diagrams, and torque specs for a 73 Plymout duster?

Where on the axle flange dose the metal and foam gasket go. Thanks

Has anybody had any experience with the weld look alikes from pacer. I'm looking at getting some of the 8 inch dragstars but am not sure if the back spacing will work.

I would like to install some hood pins on my duster. I was thinking of installing them in place of the rubber bumpers. Please any and all info is helpful. Also, if possible, please post some pics of where you installed your own hood pins. Thanks