Search results for query: *

Yes I would be interested in the product also.

Would like to know if anyone has had this problem and how to solve it. Put new clips and screws in, had the windshield put in professionally, and was putting the chrome pieces back on, when one of the screws holding the clips on the lower passenger side busted off. I don't know if it was a...

Can someone direct me here or give me some ideas. I know in the past there has been some posts on polishing tail-lite lenses, but just can't find them when you want to. I don't want to spend big bucks here on polishing kits, as the car is not a show car but a well restored driver. All these...

Thank-you very much for the info..

Looking at the expanded view of the Z-bar, I've got a question for my own info. I noticed that the spring is on top in the picture. Does it matter if its on top or the bottom, and what is the real purpose of it. I have an idea but would like to get the right answer from the pros.

Thank-you very much guys. If I ever get to see you guys, I owe you a beer or two. My cousin just lost out and owes me a case of 24....YEH>

Just need advice on the right way of doing it. I'm putting my 70 Dart 340 back together and my family member and I have a difference of opinion. There are two or three of these clips that are used on the Z-bar and the clutch rod assy. It doesn't show how these things are put on in the manuals...

I got mine done here in Canada at C.V. Vacuum Platers Inc. in B.C. Their web site is www.cvvacuumplaters.com. Now mine I had two or three spots that were chipped on the chrome area and they charge me a little extra to repair. But when I got it back it was like brand new, better than I expected...

Thank-you very much. Now I can put it the right way before it's gets to be a hassle.

Can someone help me here. I had taken my 70 Dart Swinger ralley dash bezel apart and had it sent away to have it re-chromed and repainted. The problem is when I took it apart I forgot to mark where the Brake light indicator lens and the high beam indicator lens go. They are the tiny holes on...

Was wondering if there is anywhere I could look up codes, for different components of a car. I would like to know for myself when these parts were made for my car and have it recorded for my records. Example, I have a heater blower motor that I'm about to restore and there are two lines of...

Can someone give me some advice here. Over the years I have taken stuff on and off the car and these parts I somehow don't remember being there. I've seen in different companies that there are replacement rubber seat spacers that go under the bench seats of many cars, but I didn't have any on...

I've looked at a lot of info and can't find a diaghrams or anything on the rear quarter window roll down mechanism. I took mine out when stripping the car (70 Dart) down for a full resto. I took pictures of what I could and numbered the bolts and nuts. But when I took it apart to clean and...

Thanks AdamR, It looks like the stripe goes straight across from the sides from the pictures. Thanks again ED

I'm looking for any info or pictures of the large rear stripe that goes on a 1970 Dart Swinger. I borrowed some side views of member's cars of this site that have them being shown off but can't find any top trunk view ones. The reason is that I'm painting the black stripe onto the car and I...

70Duster440, Thanks for the input. Went to your web site "Grille Resto" and that PLASTICFIX looks like pretty good stuff. I see that you made missing sections and it looks pretty good. Does it bond the two pieces together and hold up well with vibration, and does it hold well in cold weather...

I'm back for some more info. I'm about to clean-up my front plastic grill on my 1970 Dart Swinger when I noticed a couple of tabs busted off the back of the unit. Happened during storage and got pushed around a bit by the kids I guess. No-one seems to know how it happened. (How I would have...

Hi WILDCAT, That's all that I'm looking for. My car won't be a show car but a good weekend or summer driver. Yours looks fantastic.

I need some help here guys. I'm restoring my 70 Dart from top to bottom and I've run into a road block here. I'm wanting someone to restore my wiper motor and I can't find anyone that does it anymore. There were a couple of places that did them, like the "Wiper Man" and "Year-One," but they no...

Thanks for the reply. I've been leaning towards the TTI's more and more. All I've heard is good things about them, except cost.

Can anyone of you Pros tell me from experience as this boy has never tried this and was wondering if it can be done to save time and energy. I removed my block from my 1970 Dart Swinger earlier this year, but had removed the rusty headers first before pulling the block out. What a pain in the...

Hi guys, I had the wiperman web site booked into my favorites but when I was ready to send it off, he no longer was doing it. It's been a couple of months now that he's closed up. That's why I'm stuck on having a place to do it. I've tried and talked to many places but some say they don't want...

Does anyone know of anyone who restores wiper motors back to their original look. Mine has the wires a little brittle and looks like its had some hard times.

Can anyone tell me if it's possible to get info on a vehicle fender tag that has been destroyed. Purchased the car when it was 3 years old and only had one owner prior to me. The car was made in Windsor Canada and has stayed here all these years Over the years with accidents and replacing...

I have a 70 Dart Swinger that had 5/16 fuel lines. Redoing the car complete and wondering if I put in 3/8 fuel lines with sending unit. The motor has been blueprinted. Running a 750 double pumper for carb,headers etc. Would it be a big deal or would I have trouble later on.