Search results for query: *

I was wanting to ask how do you remove the rotor on a 84 w100 4x4 truck. It looks like you have to remove the but to get the rotor off but I cant get it off is there something else holding it o .

I have a new set allready

Thanks

Are the ball joint i have listed the big ball joints

Ok so I am doing a disc conversion on a 73 duster 2x upper ball joints moog k772 2x upper control arm bushings moog k408 tie rod ends Dw-es401l Dw-es401r Calipers slc-177 slc-176 Master 10-1627 Brake pads NAD-339 Wheel bearings sa17 sa4...

Thanks

Can you tell if either of the prop valves in the pic are for disc brakes.

I know I dont need the lower arms but i have them I am replacing all the bushing and other stuff as well.Were can I get new hoses as well as the offset bushings I also need the caliper bolts.

Ok so I bought most of the parts needed to do the disc swap but need a few more things. 1973 duster sbp front manual drum Switching to bbp front manual disc I have upper arms lower arms upper ball joints lower ball joints upper control arm bushings Lower control arm bushings Roters (just...

I done some searching on these awhile ago they look good but the shipping on them is crazy.

I can get a set up off a 73 + a body and then rebuild them.

Looking for it to be new

Ok so I have been looking for a front disc brake conversion for a 73 duster.I found some on ebay but buying a brake system form ebay is scary.Is there a good kit for under 500 dollars.

Put a new MC on it and the brakes work great.

Will this work I have front and rear manual drum brakes. http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_remanufactured-brake-master-cylinder-cardone_18350493-p?searchTerm=master+cylinder

We try it but did not work then vaccume blead it still nothing.I think the master is bad.

Ok so before I pulled the /6 out of my 73 duster the brakes were working great even for 4 wheels manual drums they worked great.I swaped to a 360 and we took the master cyalnder off and it set for a few weeks.We kept the rear drums but replaced them with all new parts.The front was still good so...

Anyone try this I am going to call about it later. http://www.ebay.com/itm/1962-74-MOPAR-CHRYSLER-DODGE-PLYMOUTH-DISC-BRAKE-CONVERSION-KIT-/150911433714?pt=Motors_Car_Truck_Parts_Accessories&hash=item232305bbf2&vxp=mtr

http://www.ebay.com/itm/mopar-8-3-4-dana-60-rear-disc-brake-conversion-/230575563732?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35af5fe3d4&vxp=mtr

To late all I need is roters for this setup what roters do I need.

Ok so Upper arms Lower arms spindals Left and right side KH calipers Master cylinder Po valve All above is off a 71 What rotors do I need.Will some 71 roters for summit work.

I got a new rebuild left side for 50 bucks on ebay and I have a right side and can use it as a core.

Were can I find a rebuild kit for a 4 pistion Kelsey Hayes caliper.

Will a fixed calipers fit were the org 71 had flooting calipers.

I have all needed for disc swap mins needing new roters and calipers.

I have all the disc brake parts for the 71 mins roters and calipers. So if I buy stock replacement calipers and roter for a 71 it will fit becuse the whole font brake setup will be 71.

Well my 73 is sbp so all I would need to do is take the spindals off the 71 and order some calipers and roters from summit and put it on the 73.Both the 71 and 73 have sbp.

I bought a 71 duster parts car SBP front disc the roter and brake caliper were shot.I want to put the disc on my 73 duster what would I need.

Will the stock brake calpiars or a 71 duster work on a 73, if I use the same upper control arms and spindles.