Search results for query: *

Had a vacuuming gauge in my 67 coupe & convertible and factory tach in my 67 Formula S If you want it for looks the tach looks cool If you want to use it not as easy to see as larger tach mounted on steering column

Holes with reinforcing plates under the car

If any one would have it these guys might unless you can find some NOS http://www.smsautofabrics.com I got correct headliner and carpet for my 1981 Imperial and a friend got correct red white and blue for his 69 Rambler Scrambler

A GT should have the medallion Getting harder to find every day I have the medallions somewhere and new blue legendary covers

My 1967 service manual had the paint codes for the interior in it Maybe someone with the right year manual can give you the correct info Your dash should be a flat finish as stated to reduce glare and doors would have a higher gloss finish but don't think they were high gloss.

I DONT HAVE IT EITHER! Bot I was worried, guess my convertible wouldn't have it..... I'm no help

Sent them my cracked one year only 1967 dash pad and they made it look new, dyed correct dark blue over 10 years ago Still looks brand new Not cheap but wanted it to look new and correct. I had a very good brown pad from a 67 but decided that it was as old as mine and would probably...

Think it was Mopar muscle that had article on converting column shift to floor shift for the column Little body work type skills and they can look like factory I changed mine but had everything from parts cars but then went 4 speed so more work and a real expensive 4 speed console shifter...

69 was white, my brother had a white, white, red GTS stripe 383 in early 70's LOVED THAT CAR The metal on doors and headliner were white This looks right to me compared to my brothers 67 was pearl not sure on 68 I have seen white interior with color dash other than black. I think...

Ordered mine from acc auto carpet this should have been a link but doesnt look like it, i just googled ACC auto carpet Fit well and they are a OEM manufacturer for new cars. They even made the carpet for the trailer on my prowler as OEM I ordered plush carpet instead of loop for...

Mine is mounted on the steering column like they were back in the day

I didn't have the cardboard piece and so just wrapped the carpet completely around the console. glue didn't hold the carpet well so I drilled holes and used black push pins to hold it up. Looks good and you do not see the hole for the shifter. A true purest would say it isn't right, but so is...

a correct 67 console top should be argent silver and the groove and sides chrome. I had mine chromed and liked the look and after spending the money didn't want to paint over the chrome, so I get blinded with top down and sun up at times the woodgrain for a 69 will work if you cut the...

mine has a upper and lower boot plus I had an ultra leather boot cover made to cover the crappy aftermarket boot in the console that started to rip within months of installing I do not have insulation under my carpet and the console does not get hot like yours under over

replacement for torn 4 speed shift boot Had one made out of ultra leather made out of the same material as the seats

dogs hind leg 4 speed Console The console itself would be easy to cut out Got to have a 4 speed top

I believe the 4 speed and auto console base is the same, the front top section is different. I have had both, looked the same to me. The 4 speed console top is hard to find and expessive to to rechrome, if repo is available might be a better way to go

any other pics looks like it might be Mike & Lori's car B5 Blue, black vinyl top, sometime set of cragers one of the nicest 4 doors you will see I got pictures of it somewhere

Thanks The wood wheel is shown and hope it works

Was wondering if anyone has a 69 dart with a factory woodgrain steering wheel and would post a picture for me to use in drawing Thanks in advance

yeah what he said 4 speed carpet has the hump molded in console skirt is extra $$$$ with either, not sure if 4 speed skirt & auto skirt are the same Since you have a custom floor/hump, auto carpet could be cut to work, 4 speed would have large hump to the left of center

OK let me see if I have this right You have a 5 speed are planning on using a factory console need new carpet Have i got this right? you would want to use auto carpet since the 4 speed has a hump molded into it. You might want to make the console skirt since it is designed for the hump...

Took some pictures tonight It is made so I can put the 67 GT emblem back on if I can figure out how to hold it on My rear arm rest were shorter and it had an ashtray, made the arm rest longer and eliminated the ash tray. I used the seats out of my 68 Dart parts car...

I need to take some new pictures here is a shot where you can see some of it

Leave it in Buddy has a 66 Coronet pro street without a heater. The other night, He said he had to head home before dark since he didn't have a heater. They are right about defroster. I live in central Indiana and need the defroster in all my cars. Why would you remove it and then give...

had mine covered when the seats were done with the matching material

Looks great, did you paint the back side? painting Plexiglass will scratch easy hope it holds up like you think. If you painted the front I would suggest putting Clear 3 M rock gaurd on the plexiglass As far as what someone posted about getting tired of it, I doubt it too. If it was a daily...

don't know but I put 72 Duster interior in my 67 Barracuda buckets and rear seat. Rear seat was just a little taller than the 67 cuda seat but fit OK

My 68 convertible parts car had a wood look wheel, was going to have restored but didn't like the big horn button, so I went aftermarket Grant and like the feel and look

before welding I think it would be good to put it on a frame rack and make sure it is straight before welding and ADD FRAME RAIL CONNECTORS weld them in also