Search results for query: *

Which models will interchange hoods? I know 64-65 Barracuda or Valiant will interchange but will any other models? I need a hood and shipping is INSANE.

Ok so I need some help. I had an accident a while back and got screwed by a body shop and am now left to fix the damage on my own. I smashed the front drivers edge so what I am looking for is measurements from each fender body bolt across from each other. There are 5 bolts that hold the...

Somebody please tell me that the damage looks to be fixable? From hat I could see the driver side fender, lower valance, front bumper. The core support looked bent. The head light surround.

I just finished painting my car the other night and I thought you guys may like to see it. It is minty fresh and I have not polished it yet. Roof Driver Quarter Panel and Door Jam Driver Roof and Quarter Front edge

I am excited and I wanna show my work off a bit. I posted this over at slantsix.org and got good responses. There is some orange peel and a bit of runs on the firewall but it is an engine bay so I don't know if I am going to color sand or not.

I have found an awesome method for removing the Drip Rail sealant. I took my angle grinder turned it up with a flap disk and had at it. Worked like a champ. Took 90% of it off.

Does anyone carry these trim clips? They are used to secure the trim below the door on the passenger and driver door on a 65 Barracuda.

I have a 65 Barracuda and the filler neck is angled kinda weird and low so if I fill the tank completely I always spill. Anybody have suggestions how to stop it?

I am looking for a bolt or threaded insert that has a flat edge. The hole fits a 3/8 bolt perfectly so I am assuming a half inch with the flat edge will key properly. It is for a slant six ac tensioner pulley mount.

I have a license light exactly like this one. http://www.ebay.com/itm/USED-64-65-VALIANT-BARRACUDA-LICENSE-PLATE-LIGHT-PLYMOUTH-MOPAR-DODGE-2575039-/300634527377?pt=Vintage_Car_Truck_Parts_Accessories&hash=item45ff36d691&vxp=mtr The light is in reasonably decent shape. It needs a little tlc...

Help I have one bolt completely rounded and no room to get to it from either side. I have tried vice grips and heat with torque on the bolt itself. I have tried smaller sockets none fit well enough. I have tried to cut it but I can not get a good angle to get to it. I am going to show the...

Is Laysons the only company that sell the rear quarters for a 65 Barracuda? I would like to stay metal if at all possible. I started sanding the rear drivers side quarter and I found more "sculpting". It appears almost the entire wheel has been sculpted and a good portion directly in front. I...

65 Barraucda The service manual is kind of slim on information on this subject. Can this be done by the average guy? Any tips for success? If I do get it out do I absolutely need to replace the gasket? As some may know I am in the process of priming my car and I know they window were NOT...

I am posting this seperate as I think it got lost in my other thread. 65 Barracuda door trim. There is a stainless piece that runs along the outside lower window how does it get removed? Also should I remove the doors to prime them?

Okay two questions. I am spraying epoxy primer (PPG) and it is going just fine but I am getting a textured surface. I can best describe it like a leather grain very fine bumps. I am trying to figure out what I am doing to prevent it from going down smooth. The next question is does it matter...

Where can I find the emblem expansion clips? I am referring to the clips that slides on to the studs on the back of the barracuda emblems on a 65 barracuda.

I just want to toot my own horn. I have been VERY worried and a little scared to paint my own car well today I finished sanding my Lower valance and I sprayed epoxy primer. It isn't perfect and may need some touch up but overall it was not as hard as I was thinking. I want to say anyone...

Anyone by chance know how big you need on a spraygun to spray truck bed liner? I want to do my wheel wells so it does not need to look pretty.

Along the fender top line there are some fasteners that are similar to these http://www.clipsandfasteners.com/Chrysler_Cowl_Vent_Grommet_14mm_X_20mm_Hd_Sz_p/a20667.htm They are metal though and they appear to be attached some how that I can not see to the fender. Any idea what these are and...

So I thought people might like to see my finished and polished emblems. I am very proud of how they came out. Took a bit of effort as you will see. Do not have a before for this one but this is the after.

Okay so I got the fender removed tonight but the shield has some weird bolts. Directly behind the headlight bucket there is a shield that is attached to the fender and the radiator support. The two bolts inside the engine bay on the "shelf" have square holes and a "cover" over the bolt. My...

Okay so apparently my Barracuda has been hit on the passenger front side at some point in the past. Well rather then fixing it they hid it and now that I am trying to replace my lower valance I am finding how far the damage goes. Turns out the person who "fixed" it used a bolt and nut to attach...

I am touching up the paint on my hood emblem which is generally in decent shape but most of my paint is missing. I can see the letters are black but what about the outside edge line?

As I have previously said I have started applying epoxy primer to my body panels. Would I be wasting my time and Primer to coat the inside of the panels as well as the outside?

Okay I have started the work on the body and as I remove things I want to go ahead and replace the bolts. I found a dealer on eBay selling the bolts at nearly a 1.00 a piece. I do not need full correct reproduction. Can you help me find the correct bolts at a reasonable price?

I started stripping the hood last night. I started by sanding the rust the tried stripper then back to the sanding. I found one very large repair in the front passenger corner. I know I need to take all of the old repairs out especially since they are cracked but this one is VERY thick. Once it...

Ok so I am slowly by hand sanding and priming my car. My question is an old school body guy told me I should use Laquer Primer because it is not water porous is this a good idea? If not what should I use?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150768261102&autorefresh=true Anybody think I got a good deal?

I was removing the stainless trim from the upper rear quarters on my 65 Barracuda and one of my clips broke. Can I use the same clips used for the door panels or is there a different clip?

Okay I have a 65 Barracuda and I have no idea what to call the panel under the radiator/grill. It is directly under the bumper. and has an air scoop in it. Mine is VERY beat up and I don't think I can salvage it.