Search results for query: *

i have a lifter that bleeds down in my 91 roller block after a couple days of sitting , is it ok to replace just the lifters and leave the cam as is ??any special break in requird?

if a roller would be going bad on a stock 91 , 360 roller lifter what would it sound like?

I resealed the 360 in my new project, runs well but has developed a noise, sounds like a noisey p/s pump, tonight I removed p/s belt , noise is still there, figured it has to be alt, removed that belt and noise is still there.really bumbed now, listend with a stethoscope, too hard to pinpoint...

If you have roller shaft rockers , should the oil holes be positioned the same as stock , and is that down and toward the outside of the engine, if you go by the notches on the end of the shafts mine are in wrong

a little confused on this topic, are all 360's externally balanced?if so i believe the torque conveter has weights on it. does it matter which way it is mated to the flexplate? does it have to be clocked a certain way in relation to the flex plate to be in balance? if so how do you tell what...

prob gonna look like dummy here , this came in my gasket kit, what is it and where does it go

i bought this motor as is, not sure what cam is in it, all i know is its a roller.. can anyone help with the info in the picture?

Not sure which way this plug goes in , it's the one behind the cam anyone?the old one was in the opposite way to the pictures one , the dish was facing out

what are you guys putting on your frost plugs to seal them up when repacing?

has anyone used silicone instead of the intake cork end seals? i have done small block chevs this way , but there seems to be a bigger gap on the la motor... anyone?

freshening up an engine that someone else built that is now mine, does anyone know what kind of rockers these are, cant see any brand on them anywhere

i have a 91 360 with edelbrock heads, 60775's and the pushrods i am replacing are the ball and socket style but they are 6.675 long, i am having a hard time finding any this length, anybody have any sources i havent tried?

have some questions about the oiling system , on a 360 , say comparing a 1980 block and a 1991 block , does the oil follow the same path? i have adjustable rockers and solid pushrods on my truck motor, which is a 1991 360 roller block , ,i think the older smallblock the oil flowed up into the...