Search results for query: *

what cap are you guys using to run the female end wires to male terminal on cap my msd is to tall in my challenger chassis so I'm going to gut a stock distributor and add good cap if possible I run a crank trigger and just don't wanna waste the money on a new msd like I did with what's in it now...

going pick up new 9inch for the big block challenger 2 hope to have it in by Wednesday then get new wheelie bar mounts and weight set 4 link back up then off to put new nitrous express controller and screen in we hoping to make a few more passes before the season is out and get that 570 we...

we trying to get the car together and going between pandemic work and life it's been in the building collecting dust and few new parts here and there new water pump old pump bearing went can't be rebuild but I just bought a new 1 old pump forsale if anybody wanna get it redone new trans and...

Water pump went out on my new motor had it redone on the old motor No more then 2 3 hrs run time What you guys running on your big block stroker Race only

400 block push out to 505 440 1 heads big valves td rockets heads cleaned up Custom cam for the combo and nos Ohio 8 bolt crank rods Block oring and studded 1050 dominator Vacuum pump 727 reverse pattern 8 inch 5500 turbo action vera Aluminum both thru 9inch 456 gear Squard tube chassis...

Anybody got a big block bell housing I can rent borrow use.. Trying to get my motor fired and broke in before putting it in the car The builder cant really work on it in the car..

Little more work in the tire smoke

451 messed up so we went bigger .. Wisco piston Billet rods Ohio crank 14.1 compression 1050 dom carb Vacuum pump And going to add a fogger system

Off work at day dump truck in the shop clutch gone out so figured I would do some work around the shop trying get car ready for some testing.. Installed new rack boots I have to pull the wheels to polish if you look good at the front compared to the back you can see the difference in the...

Anybody here build or run 1...let's here the set up ..

:prayer::prayer:guys I need to see a few pics of the mounts on the motor and in car if you can...im having trouble setting the mounts in the car ..if someone can post a pic of the mounts and how they are in the car would help me out a lot...I cant remember how my small block mounts was in the...

where do you guys install the prob....low deck filled to bottom of water pump holes....

ok guys bob got the low buck motor done now I need to know how to measure the intake to be cut to fit the heads????.the heads im sure has been cut but how much I have no idea so I need to find out what needs to come off the heads to finish that up.. I read to bolt the intake to 1 side of the...

well if all goes well I plan to step up from the 451 motor in the next year are so...so I am looking in to race blocks price and whats going to work the best...I am sure I would like the aluminum but looking for all the pros and cons does and don't of them all...here is what I am thinking for a...

hey guys and gals I think I asked before but not sure so here goes...I am about to put this stock 400 in to the 73 swinger and was wondering if I can use the power steering instead of buying a manual box???????not trying to put a lot of cash in to this as I have other projects going and this is...

73 dart was a 6 and now going big block 400 what are the mods that have to do to the kframe to use the mounts??????I have the spool mounts and the 400/727 to go in ..I know I have to use a (or) need to use a manual steering box , and the right headers or manifolds but right now I would like to...

seems a lot of people love the low decks..so why don't they have as many choices for the low decks????who makes 1???I know of the koleno (think that's spelled right lol) blocks.. any more out there???? just wondering :D:D never know what the jolly man might bring for Christmas this year..

thinking of doing my big block pan for my low budget deal...any of you guys deepen your pans?????lets see them..:D

:Dwell out of town working and have my stuff sitting on the table in my shop.. my son and his friends use the shop to do god knows what and have moved my stuff around and now I cant find my rod bearing cap... just a stock cap but I don't think I can just get a cap and replace the 1 that is gone...

can I get away with using the stock rockers for right now on a 525 lift cam????hyd....I have some adjustable rockers to go on it but right now I am looking to get this thing going and work on my race car....march is coming soon and would like to have my race car on the ground running for my...

ok guys i took the 400 apart and the main bearing are marked at 20 then under that it has 11 74 any idea of what this may mean??? i take it as 20 under and 11mth 74 year..any help would be great thanks mike

will your oli mod work with a hyd. cam ??? i will be using stock rockers ..plan to go to a adjustable rocker later on but not at the time the motor will be done.. 400 crane cam 504/528 hyd comp cam 925 springs comp locks and retainer 906 heads ported tm6 intake with 750 (bg) thanks mike mrl...

ok guys i picked up a 75 400 (thanks forest) and i plan to put it in my 70 duster to drive or may just end up selling the damn thing..but anyway had a few ??? for you guys..the motor is stock and i dont plan to spend alot of money on it as its just to drive..i however did pick up a tm6 intake...

well i would like to thank my buddy bob for all the help on this motor ..(bob in the pic) so this is it on the way home.... http://i1123.photobucket.com/albums/l548/bigmike540/IMG_20120724_175314.jpg a little run down on it.. 400 block 3.75 eagle crank and rods with je dome tops indy 440-1...

what do you guys think of the 906 heads???? i got a pair from a guy and was told that they flow pretty good..ported he says that they went 300/2xx in/ex does this sound right for the iron head????? i plan to put them on the 400 that will go in to the dart if i dont sell it...along with a nice...

i would like to know if any of you guys that do this stuff would like to tell:glasses7:...what do you do to your blocks ,or any little tricks of the trade that you may do to make a block last???:coffee2:??????and before it is said (get a after market block) i know i have heard that more then...

ok guys and girls lets hear some tips and tricks to this install...i have a 73 dart and plan to put a 400/727 big block in to it..i plan to go to manual steering and do away with the power stuff.. i plan to use the motor mounts from shumacher(think thats right) ....i would like to put some cheap...

can i use any pick up for this pan or does it take a special pick ....i have the pan and will be getting a 400 motor that is complete..will the pick up in this motor work with this pan??? thanks mike:D

anybody have any pics of the headers (b/E) body headers that they modified to run on a body with a low deck..i have seen the bbd tech but was looking a pic if someone has done it..thanks mike

in the tire smoke Join Date: Sep 2007 Location: nc Posts: 951 Thanks: 0 Thanked 1 Time in 1 Post ok guys 73 dart swinger 6 to b...