Search results for query: *

My 71 dart has the 71 ECS or whatever it's called gas cap and filler neck. I am swapping out the gas tank soon and at the same time I'm switching filler neck to the 72+ style so I have the more common gas cap. I took a close look and noticed something though. See pics below. This is a '75-'76...

I am ordering new tank-to-pump fuel line for my 71 Dart since I am installing the new gas tank. May as well go 3/8" right? Question is whats the difference between fuel line on a 71 Dart vs 72 Dart? When I look online they show either fuel line for 69-71 or 72-74 I ask because I am using a 72+...

OK here's a little back story and info as to why I am doing this. This is my 71 Dart with a 360 that has maybe 1k-2k miles on it since the stock rebuild. I've had a minor yet annoying issue with the car since it's been running. At cruise (I can only tell when cruising on the freeway), on...

Guys, I'm taking the top off my Edelbrock AFB to adjust the floats and clean the needle/seat. While I am at it I also want to remove the 2 idle mixture screws to clean out the idle circuit. I don't have access to compressed air right now but I do have a spray can of carb cleaner. Can I just...

I am doing a fuel tank swap soon on my 71 Dart. From the factory it looks like there's nothing between the straps and the tank. Is there any point to adding anything? Such as these rubber liners? Pair Universal Tank Rubber Strap Liners - 24" long x 1 1/2" wide - SL24 | eBay The tank will have...

I bought a used filler neck from a member here. Looks to be in pretty good shape. I will be installing this in the car when I swap out the gas tank. Anyone know what I should do about the surface rust on the front of the filler where you put the gas in? Should I just sand/steel...

Bought a new tank Spectra CR11E (1972+) tank. Have a few questions. First, see attached photos. See the copper vent line at the top? That line is hanging down an inch or 2 from the top of the tank. I don't really understand why. Is it supposed to be like that? I thought it was supposed to be...

I have to replace the gas tank in my 71 Dart. I purchased a Spectra tank for 72+ due to the superior vent design. My question is which filler neck grommet should I get? I've read many threads saying how some grommets are very hard to install. I know the sand/polish the filler neck nice and...

I've used Lokar throttle & kickdown cable combo assemblies with no problems. This is my first time hooking it up to an Edelbrock carb. I have everything hooked up correctly and the throttle cable has been cut to fit and operates very smoothly. The problem is there doesn't seem to be enough throw...

A few months ago I broke down and bought a NOS sending unit off ebay for my 71 Dart. I was using a Spectra aftermarket one that had all kinds of problems (linear so gauge read wrong, pickup tube not deep enough in the tank, etc). Unfortunately the NOS sending unit doesn't work. I imagine the ohm...

I searched the forum and found this question asked a few times with no answers. I'll explain the situation and be more specific. Hopefully someone has found an easy solution for this. My 360 LA has an Edelbrock 600cfm performer on it. My car (71 dart) has 5/16 fuel line, hard line, in great...