1996 dodge ram question

-

Tadams

Tadams
Joined
Jun 13, 2008
Messages
3,633
Reaction score
952
Location
nc
Sorry to ask a truck question here, but the guys on the truck site either don't know or just don't answer.
I need to replace the coolant sensor on a 318. I know it is located to the left of the radiator hose. Mine is broken, but looks like just one wire goes to it. I picked one up this morning but it has two wires. I'm at work and can't work on it today.
Thanks
 
The only coolant sensor I can see (on no less than 4 beer kegs) is on the RIGHT (pass) side next to the heater hose nipple. They are all 2 wire

It uses a VERY tiny connector
 
The repair manual shows two. One on each side of the thermostat. I think I have it figured out now.
Thanks
 
I purchased one of each and will return the one I don't need. Problem solved
 
The single wire sensor is for the temp gauge, and the dual wire sensor is for the ECM.
 
-
Back
Top