4" vs. 4.5" bolt pattern

[Jarvis]

OK I have a 70 Dart with 9in drums, (don't worry I'm replacing them with disks), but I don't know where to measure to determine if it is a 4" or 4.5" bolt pattern. Any advise on how to measure the bolts or at least where to measure to and from.

:snakeman:

 

[Longgone]

Measure from the center of the hub to the center of a lug and multiply times 2.

 

[70aarcuda]

70 dart with 9 inch drums are going to be a 4 bolt pattern....

 

[pettybludart]

OK I have a 70 Dart with 9in drums, (don't worry I'm replacing them with disks), but I don't know where to measure to determine if it is a 4" or 4.5" bolt pattern. Any advise on how to measure the bolts or at least where to measure to and from.

:snakeman:

If your replacing them?Just ask for 4.5 bolt pattern?73 and up were the large bolt pattern(LBP)

 

[abodyjoe]

OK I have a 70 Dart with 9in drums, (don't worry I'm replacing them with disks), but I don't know where to measure to determine if it is a 4" or 4.5" bolt pattern. Any advise on how to measure the bolts or at least where to measure to and from.

:snakeman:

http://www.wheelvintiques.com/pdfs/wheel_fitment.pdf




.

 

[SwingerDeluxe]

Look at this for info:


http://www.mrt-wheels.com/boltpattern.html

 

[MoparJoe20]

If it's an A body with drums on the front it has 5x4" wheels- all the way thru '76.

 

[dgc333]

The easiest way to measure is to go from the center of one stud, skip one then to the outside edge of the next.