65 barracuda - fluids

[GJSZ51]

This barracuda is a mildly built 273 with factory 4 speed and stock rear end.

I am interested in what transmission fluid and rear grease to run and any recommended additives?

Thanks to all comments!

GJS

 

[krazykuda]

Trans fluid is Dextron 2 originally, I can't keep track of what number dextron they are on now, I think it's 5 (Dextron V)...

Rear end lube is 80/90 weight, and if you have sure grip there is a special formula 80/90 weight for sure grips.

 

[66fyssh]

What he ▲▲▲▲ said. I think the last time I bought Trans fluid, I found Dexron 3/4.

 

[grimreaper]

Your A833 tranny is going to use 85W-90 gear oil, GL4 specification (with no friction modifiers) Almost a gallon.

Your rear differential will take 80-90W or 85W-90 too and if it happens to be a sure grip unit will need a bottle of Mopar Sure Grip axle additive - 4318060 (or anybodies friction modifier additive, don't tell anybody but I get mine from the Ford dealer because he has it on the shelf)

 

[GJSZ51]

Thanks guys!

Note: it is a 4 speed.

Thanks, GRIMREAPER

 

[pishta]

I wouldnt use Dex-6 in an old auto, IIRC it is made with synthetic base oils. Stick with dino-based Dex 2-3. Dex-6 starts thin, and stays that way, almost no change with heat. that could screw with old calibrations

 

[krazykuda]

Thanks guys!

Note: it is a 4 speed.

Thanks, GRIMREAPER

Doh... I missed that... #-o

Disreguard the Dextron comments above...

 

[moper]

I was going to say - the trans needs gear oil too.

 

[66fyssh]

Thanks guys!

Note: it is a 4 speed.

Thanks, GRIMREAPER

Dang, I'm getting old. Doh!

 

[cosgig]

Dang, I'm getting old. Doh!

No argument there!!!😃

 

[krazykuda]

Dang, I'm getting old. Doh!

I made the same mistake, so I'm there with you.... :banghead: