'65 Signet question

[tygerI3]

I'm in the process of changing the front brakes in my '65 Signet. I took the drum off of one side and it seems that the hub for the wheel is attached to the drum. I bought a replacement drum from Napa and it doesn't have the hub attached. I can't seem to find a hub assembly. Does anyone have any suggestions or hints? Thank You

 

[VDART]

do a search on the term "swedge", mopar used the wheel studs to hold the drum on the hub-- this is now a unit & needs to be turned on a lathe as such.

find an shop that has been in business for some time(mom/pop type), they will have the knowledge needed to properly seat the new drum, Lawrence

 

[Dart_Doctor]

x2

 

[zhandfull]

You have to press out the wheel studs to seperate the hub from the drum. Best to have a shop do it unless you have a press and experience.

 

[Dart_Doctor]

i got lucky on my old 64 and droped one that i was working on and it just fell apart lol

 

[tygerI3]

i thought i might have to press out the studs...thanks for the response everyone