[WANTED] 67-9 Dart Speedometer

[Map63Vette]

I'm looking for a somewhat junk speedo gauge to do some experimenting with. A recent trans swap has left me without a mechanical drive cable, so I wanted to mess with some ideas to make my own electronic to manual conversion kit and didn't want to butcher my nice speedometer. I have the standard gauge set, not sure what all years fit. Don't need it to look pretty or for any other gauges to work since I plan to take it apart anyway.

 

[trapster]

Dont have it anymore sorry

but any speedo should work

 

[physixx]

I have one also so put me on the list. Not sure if this is the type that you need.

Ken
Edison, NJ

 

[Oldmanmopar]

Put me on the list. I also have them for a 68 69 two complete bezels for $60 shipped. 67 is different it doesn't have a push on cable. I take paypal at [email protected]

 

[dodgedifferent2]

I have one from a 67 dart and one from a 69 dart up here in Canada

 

[parishpbs]

I have one from a 67 that looks about like the one pictured but from a 67. PM me if your interested.

 

[Map63Vette]

Wow, that was way more responses than I was expecting. And quick too! Should have one on the way now. Thanks for all the offers! If I end up needing another I'll be sure to check in with you all.

 

[Jim Lusk]

There are kits out there to do this. Summit probably has them...

 

[trapster]

like this
http://www.jegs.com/i/Auto-Meter/105/3982/10002/-1?parentProductId=#moreDetails

 

[Jim Lusk]

Yeah, that's one way, but there are kits to power the original speedometers with a motor taking the signal from the speed/distance sensor...

 

[Jim Lusk]

This is one for a GM cable. A custom cable could be made if necessary. Summit also has a Ford one. There may be a Mopar one out there, but you'd have to look farther.

http://www.summitracing.com/parts/dak-ecd-100-1/overview/