LJS30
Well-Known Member
Man all I can say is you guys are true artists. You take cars with rust and dents ant turn them into real street machines. Not trying to sound corny but I wish I had some buddies who could work with me on my ride.
-
E
EP87
Guest
Got a little more work done today - started to repair the damage to the drivers side lock striker panel, in preparation for mounting the qrt panel. just a lot easier
to do now while I have full access to the backside.
Used 1/8" plate steel with 3/4 inch hole, the original had a 1" hole but the 3/4 seams to allow for full adjustment. Did this same repair to my son's a couple of years ago and the extra thickness doesn't seam to make a difference.
Still needs a little more grinding, but with a little filler, it shouldn't look to bad.
Richard
to do now while I have full access to the backside.
Used 1/8" plate steel with 3/4 inch hole, the original had a 1" hole but the 3/4 seams to allow for full adjustment. Did this same repair to my son's a couple of years ago and the extra thickness doesn't seam to make a difference.
Still needs a little more grinding, but with a little filler, it shouldn't look to bad.
Richard
E
EP87
Guest
BTW- anybody have one of these, or know someone thats cutting up a duster for parts. I'm having a hard time finding one. Its the trunk latch piller that mounts to the rear panel.
I'll also try posting in the parts wanted forum.
Richard
I'll also try posting in the parts wanted forum.
Richard
EP87 I will keep an eye out and do some searching for one.
Your A body is looking like a great A bodie :thumrigh:
Your A body is looking like a great A bodie :thumrigh:
-
