71 duster slant 6

[Johnny71dusty]

Looking to replace all 4 of the rubber break lines . Anyone know what part numbers those are or who sells a full kit with all 4 ? Autozone doesn’t have a clue they pulled up some generic crap that was no way going to work

 

[Syleng1]

If you have time- hit Rock Auto.

 

[valiantwagonguy]

Go to a shop that makes hydraulic lines for trucks and equipment with your old lines and have a set of steel braided ones made. That's how I'm dealing with them on all my cars as I replace them. I even used them on my rusty old 71 Chevy C20 pick up that I use for work. This truck had a one year only line on it that I searched high and low for.The guy made me new lines using the rare one year only ends.Saved my butt big time

 

[Professor Fate]

Even if you don't order from them, here are the numbers:
1971 PLYMOUTH DUSTER 3.7L 225cid L6 Brake Hose | RockAuto

 

[cudamark]

4 hoses? Which brake system do you have one the car?

 

[Johnny71dusty]

4 hoses? Which brake system do you have one the car?

? 4 wheels drum small bolt pattern .

 

[Johnny71dusty]

? 4 wheels drum small bolt pattern .

You asked what break system do I have . So I answered . Not sure what else to tell you

 

[cudamark]

Ok, a brake hose for each of the front brakes, and one for the rear axle....where does the 4th one go?

 

[Johnny71dusty]

Ok, a brake hose for each of the front brakes, and one for the rear axle....where does the 4th one go?

Mine have a rubber hose at al four wheels

 

[cudamark]

And a 5th for the body-to-axle? Is this a stock Mopar rear end?

 

[Johnny71dusty]

And a 5th for the body-to-axle? Is this a stock Mopar rear end?

I didn’t look for a 5th any where but yes it’s all looks stock and 50 years old

 

[Johnny71dusty]

I want to buy entire kit but the kits don’t show any rubber on them

 

[cudamark]

I'd like to see a photo of that setup. I've never seen a Mopar live axle with hoses. They've all been hard lines on everything I've seen.

 

[TF360]

Check Classic Tube and Fine Lines

 

[RustyRatRod]

There are three rubber brake hoses. Two on the front and one on the rear.

 

[cudamark]

The OP says he has 4.....

 

[RustyRatRod]

The OP says he has 4.....

I know.

 

[Scody21]

The OP says he has 4.....

I’m wondering if one is plumbed to the gas tank....

 

[Johnny71dusty]

I’m wondering if one is plumbed to the gas tank....

all 4 drum breaks have a runner line going to one as well as rubber line in center of the rear axle that I didn’t see before.

 

[RustyRatRod]

all 4 drum breaks have a runner line going to one as well as rubber line in center of the rear axle that I didn’t see before.

There are only three rubber hoses.

 

[Ironracer]

There are only three rubber hoses.

Yep. Hard lines on the axle.
.. Wonder if somebody " fixed" something in a pinch? Or Redneck Renovated it, in a bad way... I'm no Pro, but I've seen LOTS of " rear ends"..

 

[Ironracer]

Have you looked at the connections? Are they the same on both sides? Is it possible a rusted out/ damaged area was " repaired "?

 

[cudamark]

Yup, it would still be nice to see a photo of the rear end setup.

 

[Ironracer]

Yup, it would still be nice to see a photo of the rear end setup.

Please? Lol

 

[RustyRatRod]

Yup, it would still be nice to see a photo of the rear end setup.

Yeah, because if it has four......or five hoses, it's certainly not like it left the factory. It's been modified.