73' B3 340 Duster pro touring build

-
You're probably not pushing the envelope enough to satisfy Ross.

Maybe a couple of wind turbines on the roof to recover some energy.

Einstein said "You cannot create energy. You can only change it from
one form to another"
 
thanks for the update/picture last night. you got to be excited to get to this step.
 
DR HEMI said:
What engine/trans/O.D./rearend will be in this car?
Click to expand...

416 stroker, 727 and 3.91 tru trac 8 3/4. Old school stuff with some custom modern touches.

jrlegacy23 said:
I vote to stay green. Propane converted Slant Six, auto with a gear vendors, and a 2.76 7 1/4 so she cruises 60mph down the highway at 725 RPMs
Click to expand...

No going green on this one....High octane gulping stroker engine.
 
HemiDenny said:
thanks for the update/picture last night. you got to be excited to get to this step.
Click to expand...


Here's what Denny is talking about ....It's now official, the Duster is gone to paint and body. Everyone thinks I'll be bored but I have lots of Custom parts to make for the interior and engine. I was told to expect the car to be done in December.

Denny,
I included a better pic of the shock tower support holes...I'm gonna make the crush bolt/sleves this week.
 

Attachments

  • duster 001.jpg
    106.5 KB · Views: 1,049
  • duster 003.jpg
    94.6 KB · Views: 1,356
  • duster 006.jpg
    117 KB · Views: 1,051
  • duster 005.jpg
    61.3 KB · Views: 1,046
Ross, I am in awe. i havent peeked at your thread in a long time. Can you bottle up some of that talent and creativity and send it my way? I will pay shipping.

Cant wait to see it painted
 
Withdrawl starting... this has been an entertaining thread.
 
Idaho said:
Withdrawl starting... this has been an entertaining thread.
Click to expand...

Thanks, I have been working on the Dash since the car body is now gone, once I get the dash closer to completion I'll get the pics going again, I have a few twists coming with the dash....Oh, and the motor will have several one off custom parts and pieces that are in works also.
 
Dash is sandblasted and epoxy primed, welded up the ash tray and drilled the mounting holes and attached the gauge panel.
 

Attachments

  • duster 024.JPG
    164.2 KB · Views: 918
  • duster 031.JPG
    176.8 KB · Views: 911
  • duster 034.JPG
    196.1 KB · Views: 902
  • duster 035.JPG
    120.3 KB · Views: 911
Is that kinda like an emphatic "NO SMOKING" sign?
 
HemiDenny said:
not sure...but I think I've seen that ashtray thing done somewhere else
Click to expand...

I saw it on this guy's "stock" Duster somewhere in this Restoration Forum....I can't remember for sure but I think it was a Silver Duster with a Porno Red interior.
 
That would have been such a cool place to hide the nitrous arming switch and/or push button start. :)
 
76orangewagon said:
Not really sure what smells worse.......a smoked in car or a vintage muscle car with a musty smelling interior. Either way they both stink !!!! :-k
Click to expand...

I've had my fingers in places that stink more......... anyway, nice choice of glove box doors, same as what Im going to use. :thumblef:
 
HemiMark said:
I've had my fingers in places that stink more......... anyway, nice choice of glove box doors, same as what Im going to use. :thumblef:
Click to expand...

try some stuff called "toilet paper"...It's not for just blowin your snorkus.
 
76orangewagon said:
I saw it on this guy's "stock" Duster somewhere in this Restoration Forum....I can't remember for sure but I think it was a Silver Duster with a Porno Red interior.
Click to expand...

naw..saw that ride too......that car is a radio/ashtray factory delete car, they made em for the cheap suckers
 
You must log in or register to reply here.
-

Back
Top