scottylack
Well-Known Member
My vent tube broke ...where can I get another...?
its tube ... someone told me it was a vent tube ... looks like stainless, coming out of the top of the axel casing
It will work, he just has to swap the brake tee bolt with a vent/bolt in the axle tube, the threads are the same. The broken vent tube should be plugged with something if you go this route.No the vent I recommended earlier won't work without tapping threads into the case
It will work, he just has to swap the brake tee bolt with a vent/bolt in the axle tube, the threads are the same. The broken vent tube should be plugged with something if you go this route.
breather...?
Just to clarify on all the information given. I also have a 8.25 with flush broken off vent tube. I can use the breathable 8.75 bolt as double duty and vent and hold down dist block? I assumed that the venting from the center section would be unable to vent from the tube? Just want to clarify that everyone agrees it can before I go that route.