terry
Well-Known Member
hi folks here is my question i have a 68 notchback barracuda that i had pulled the rear end back to mount the front hole on the axle spring perch to the super stock springs. i also drilled another hole on the shock mount plate to help align the leaf spring center bolt.now this did give me the room i needed in the front by the qtr panel when i mounted my tires.but i am not real happy with doing it this way. should i have left it all alone and just put in a 3/8 aluminum block between the front leaf spring perch and frame? that way everything stayed in the stock position.
thanks
terry
thanks
terry