Wyrmrider
Well-Known Member
Early Magnum exhaust- what I have on my pickup
HE Hyd roller Garrett thanks
but as far as HFT cams lunati Has at least 3-4 all at 112LCA
HE 714 258-264 207-217 .485
HE 217 258-268 206-215 .485
VD 715 264-270 213-219 .485 same spec as VD 717 IDK difference there is also a VD 270
How 254-262 201-209 .480.480 114lca 8.5CR
How 262-270 209-217 .496-.496 112lca 9+CR
HOW 274-278 221-225 .507-.533 112 9+ and 1800 stall
you can find .200 in lobe list catalog
before I picked one I'd have to see the .200 and also match to compression ratio
but recall the custom lobes @ 1.6
.006 .050 .200 lobe 1.6
260° 211°126°.316″.505″
260 208° 128° .327″ .523″ .
260°210° 132° .313″ .500″
264 212° 128° .310″ .496″
264 218 139 .340 .544
nothing from melling? try the early 318 cam or try Elgin (they are all the same mfg)
HE Hyd roller Garrett thanks
but as far as HFT cams lunati Has at least 3-4 all at 112LCA
HE 714 258-264 207-217 .485
HE 217 258-268 206-215 .485
VD 715 264-270 213-219 .485 same spec as VD 717 IDK difference there is also a VD 270
How 254-262 201-209 .480.480 114lca 8.5CR
How 262-270 209-217 .496-.496 112lca 9+CR
HOW 274-278 221-225 .507-.533 112 9+ and 1800 stall
you can find .200 in lobe list catalog
before I picked one I'd have to see the .200 and also match to compression ratio
but recall the custom lobes @ 1.6
.006 .050 .200 lobe 1.6
260° 211°126°.316″.505″
260 208° 128° .327″ .523″ .
260°210° 132° .313″ .500″
264 212° 128° .310″ .496″
264 218 139 .340 .544
nothing from melling? try the early 318 cam or try Elgin (they are all the same mfg)
Last edited: