carb Choke

[SRT_DSTRHOLC]

Does anyone still use Manual Choke on their carb? My holley donest have one, so its another thing I need to add.

 

[demon seed]

Does anyone still use Manual Choke on their carb? My holley donest have one, so its another thing I need to add.

I don't use any choke, a couple or 3 pumps to get her started bring her up to a 1000 for a 3 minutes and she idles on her own.

 

[SRT_DSTRHOLC]

do you have the choke tied open?

 

[dgc333]

I use an electric choke. Can't be bothered with a manual choke and certainly don't have the patients to sit a fether the throttle until the engine will idle with no choke.

NOTE: If your carb doesn't have an electric choke you can buy a kit from Holley to add it.

 

[demon seed]

do you have the choke tied open?

Got no choke plate on the Demon 750, mind you it never goes out to play when it's cold.

 

[SRT_DSTRHOLC]

O, so you took the plate off?

 

[rumblefish360]

They do not come with chokes.

 

[demon seed]

They do not come with chokes.

What he said, don't need no stinking plate (said with hispanic accent).:toothy10:

 

[SRT_DSTRHOLC]

ook, Ya I read that some guys just change to a Proform Main body or Get a Hack Saw and Chop the housing off were the choke goes to help flow better and to get rid of it.

 

[rumblefish360]

LOL, I don't know about a hack saw, but what ever works, works.
Depending on what Demon carb you have, it ethier comes with the choke tower but no choke plate or it is like the Holley HP carbs.

 

[SRT_DSTRHOLC]

o haha Its a Holley 750 vac sec. But I think I will just tie it off till I switch to the Proform

 

[340sFastback]

Just wire the choke open or take it off. I never run with a choke, one less thing I have to mess with.