Rustyfish
Member
So I pulled my dash gauge cluster to do some work behind with wiring and ultimately refurbish the cluster. I've gotten some good tips on do so, but looking for the best way to remove the plastic rivet tips that hold the bezels in. Those posts are pretty small for reattachment and would like to retain as much of it as possible.
Possiblities:
1. Cutting
2. Grinding (dremel)
3. Melting (small torch, lighter)
Here is the front of my cluster and why it needs doing.
Also, the black area below the gauge name is rusty, dirty, etc and needs addressing.
So looking for the best way to remove the bezels without destroying what is left.
Thanks
Possiblities:
1. Cutting
2. Grinding (dremel)
3. Melting (small torch, lighter)
Here is the front of my cluster and why it needs doing.
Also, the black area below the gauge name is rusty, dirty, etc and needs addressing.
So looking for the best way to remove the bezels without destroying what is left.
Thanks