Factory Floor Shifter Linkage

[racingsnake440]

Getting a '74 Dart sport running after it’s been sitting for a long time. It’s a console shift car but some of the linkage is missing. What exactly do I need to connect the shifter to the trans? I'm guessing there should be a bracket that attaches to the trans and a link going forward to the selector?

 

[MoparMike1974]

There is a bracket with a plastic bushing that that lower shaft goes in. It bolts to the two tabs in the tailshaft. There should be a link with an adjustable block to attatch it to the trans lever.
Someone repops the linkage for sure, I have bought one and it fit well. It may have been classic industries. Im not sure about the bracket but I bet that is available too.

....found it but out of stock. https://www.classicindustries.com/product/all-years/dodge/all-models/parts/mp71015.html
Here is the bracket https://www.classicindustries.com/product/all-years/dodge/all-models/parts/md2540.html

 

[66Valiant528]

I think Mancini has it as well

 

[racingsnake440]

Thanks guys!

 

[Cuda Al]

Tony's Mopar Parts
NEW Mopar Automatic Floor Shift Linkage Lower Rod, 66-76 A-Body + 66-70 B-Body | eBay



Alan

 

[Cuda Al]

Year One
1967-1976 A Body lower shifter linkage rod for floor shif...


Alan