Chuckbizkits
Well-Known Member
I'm running an after market tank and fuel pump. Stock motor, factory EFI. The fuel pump is rated at 100PSI, 400LPH. What fuel regulator do I use?
I would recommend a filter/regulator type, not an external adjustable one as you can put filter back by tank with return and just run one line forward. You didnt mention what year, the first two years had same pressure as a magnum and later ones bumped up to 58#. If its early, there is a 48# filter/reg and if its later than 04 use the LS type.I'm running an after market tank and fuel pump. Stock motor, factory EFI. The fuel pump is rated at 100PSI, 400LPH. What fuel regulator do I use?
Magnum,I would recommend a filter/regulator type, not an external adjustable one as you can put filter back by tank with return and just run one line forward. You didnt mention what year, the first two years had same pressure as a magnum and later ones bumped up to 58#. If its early, there is a 48# filter/reg and if its later than 04 use the LS type.
View attachment 1714944401
Johnny certainly didnt shell out his "hard earned money", Pace performance is a giant company that sells $10,000 hemi crate engines. They also sold LOTS of FI Tech here for the last year without paying to be a vendor. Just saying.As a business owner that just cited a customer for using your info, and then buying elsewhere. you dont find it ironic you posted basically the exact same fuel filter/regulator as an actual paid vendor did? And now have a potential sale lined up? Opposed to the first guy that posted the corvette filter, plus paid his hard earned money to be here?
Well, since you have been selling FI Tech here for a year before becoming a vendor, I would guess you would know. I have also seen you offer bad advise like "dont buy cheap chinese pump from ebay, buy this one" and then offer a chinese made pump with high failure rate for $200. I am guessing you dont spend much time in the install bay. We do, we actually build A bodies all day and dont sell anything we wont use on our own cars. BTW GM doesnt make fuel filters, an outside vendor does, which is who we buy from.What you offered to OP was not complete, did you find out what pump he has, what his tank set up was, what else he will need to hook it all up? Or did you just want to make a quick sale on overpriced half kit? In all honesty, we are or I should say were trying to gauge interest in products to see if we could ever get our vendor $$$ back in the form of sales. It appears not as most members are joined at the waist with scummit and jegs even though we figured out how to beat their prices. If not being "righteous" is a concern, I am a 52 year old mechanic with 4 crushed disks and a broken vertebrae and J is a disabled vet that served 3 tours in the sand box, full of plates and pins from getting blown up 3 times by ied's. we both have young daughters and are single parents. i am not some marketing asshole,I am just trying to make a living which, aint happening here. Enjoy selling your $10K hemi crates and I will go deal with building A bodies. I remember something about living in glass house from 3rd grade.....Also hard to believe the righteous "just gauging interest" comments...when clearly you're marketing.