Just thought I would share my install pictures. Some may have all ready seen these in my build thread pro touring 10k. Let me first say that Dennys HDK suspension is top quality. I build these car for a living and I install a lot of aftermarket suspensions. The HDK is very nice. you wont be disappointed. So here is my set up . 2" wilwood pro drop spindles. wilwood 13" rotors with 6 piston radial mount calipers. Wheels on the front are 18x8 6" B/S with a 235/40/18 tire 25.4 over all diameter. wheel and tire set right in the center of the wheel well. front crade sets at 6 inchs off the ground and front fender at its lowers point is right at 5" . The pixctures are set at ride weight. hope this helps some one considering the HDK set up.
HDK on a early A
- Thread starter prrc
- Start date
-
DR HEMI
Man on a Mission
Unbelievably nice placement for an 18x8 wheel on this little car. The wheel design itself is also a personal favorite. Can't wait to see updated photos as this build progresses.
The big brakes should make it quite a driver. Obviously you know what you are doing.
The big brakes should make it quite a driver. Obviously you know what you are doing.
nevjr
Well-Known Member
how much more/less does it weigh vs stock?
Not sure. You would have to check with Hemidenny. I'm sure he will have the answer.
strang3majik
Well-Known Member
How much in parts did it end up costing? (brakes, rack, spindles, plus the $2800 for the subframe)
I'd love to do this to mine. Would make the big block a much easier fit as well.
I'd love to do this to mine. Would make the big block a much easier fit as well.
Old Man Mopar
Righteous Dude
Probably similar to later A-Body.....About 33 lbs less.
My parts cost will be some what less than the average guy can buy for. I own a speed shop/ Fabrication shop in Indy. So I'm not sure on realistic price for parts
pishta
I know I'm right....
Who makes those hoops the upper shock mount welds to the frame? I need a set as I gutted my inner fender...
pishta
I know I'm right....
-
