Heat Shrink Hose Clamps

[Jeff Seighman]

What is the deal with the Allstar performance and Gates heat shrink hose clamps, can't find any in the sizes I need. Theirs some people selling the damn things on e-bay for 3 or 4 times the normal prices. Did Covid affect the production of these to?

 

[Mopar Momzee]

What is the deal with the Allstar performance and Gates heat shrink hose clamps, can't find any in the sizes I need. Theirs some people selling the damn things on e-bay for 3 or 4 times the normal prices. Did Covid affect the production of these to?

What size u looking for

 

[RustyRatRod]

What is the deal with the Allstar performance and Gates heat shrink hose clamps, can't find any in the sizes I need. Theirs some people selling the damn things on e-bay for 3 or 4 times the normal prices. Did Covid affect the production of these to?

That's a good question. I have some on the heater hoses on Vixen.

 

[Jeff Seighman]

1 to fit 1 inch and 2 to fit 1 1/2 inch hose

 

[Mopar Momzee]

1 to fit 1 inch and 2 to fit 1 1/2 inch hose

I have a 1 1/16

 

[Jeff Seighman]

I have them on all the hoses, I hate the way the metal clamps look.

 

[Jeff Seighman]

I have a 1 1/16. Thanks but that won't work.

 

[Mopar Momzee]

Can send u one of these

 

[Mopar Momzee]

I have a 1 1/16. Thanks but that won't work.

Ok trying to help

 

[Jeff Seighman]

Mopar Momzee, I'm sorry I read that wrong. That would be great I'll send you a PM. Thanks. Jeff.

 

[RustyRatRod]

They sell an entire kit #9108943 that I've not found in stock anywhere.

 

[RustyRatRod]

I have them on all the hoses, I hate the way the metal clamps look.

I was skiddish at first, but so far they've held really well.

 

[Mopar Momzee]

I was skiddish at first, but so far they've held really well.

They work really well have had no problems at all

 

[Jeff Seighman]

I've used them for years with no problem, take a little paint thinner to get the lettering off and they look great.

 

[RustyRatRod]

I've used them for years with no problem, take a little paint thinner to get the lettering off and they look great.

Looks like if you can find any, you better stock up.

 

[Jeff Seighman]

Shout out to Mopar Momzee, sending me the clamp, no cost involved. It's people like this that make this site great.

 

[RustyRatRod]

Shout out to Mopar Momzee, sending me the clamp, no cost involved. It's people like this that make this site great.

Badass!

 

[Jeff Seighman]

Doesn't that look better than the metal clamps.

 

[413]

How do you remove the hoses?
Are these clamps reusable?

 

[Jeff Seighman]

There is a tool you can buy to remove them but I just use a razor knife to score it than take a pick to split it. Non reusable.