jcarr210
Well-Known Member
I have a 670 street avenger on my 340 with a lunati cam that’s giving me issues. I had some problems with it and turned out something was clogged in the discharge nozzle. That’s fixed and the car has a rough idle from the cam but otherwise perfect. It doesn’t die after revving it coming to a stop or anything.
Problem is if i step on it it will bog down and either die or sounds like it’s dead then hauls *** off. I almost have to feather it to get it going before I can give it more gas. Once I’m accelerating everything is fine and it cruises all day long. If I barely touch the pedal it accelerates slowly and gives me no issues. It ran perfect before I replaced the intake manifold gasket and now it’s giving me issues. I adjusted the accelerator arm and it didn’t make a difference. I’m not too savvy when it comes to carbs so any advice would be appreciated. Thanks!
Problem is if i step on it it will bog down and either die or sounds like it’s dead then hauls *** off. I almost have to feather it to get it going before I can give it more gas. Once I’m accelerating everything is fine and it cruises all day long. If I barely touch the pedal it accelerates slowly and gives me no issues. It ran perfect before I replaced the intake manifold gasket and now it’s giving me issues. I adjusted the accelerator arm and it didn’t make a difference. I’m not too savvy when it comes to carbs so any advice would be appreciated. Thanks!