My build is getting real close to being ready to test on the track. Any guesses on how much HP the engine will make? What about ET and MPH in the 1/4?
408
12.5 CR (flat tops with valve reliefs)
Trick Flow CNC Ported with titanium retainers (I don't have the flow numbers but they are available online)
Solid Roller Cam - 660 lift, 258/264 duration at .050 108 LCA
HS roller rockers (1.5's)
Thumper 950ish carb on a Victor 340 and HVH 1" spacer
Hedman Huster headers with 1 7/8" primaries and 3.5 collector
727
Reverse Manual Valvebody
5800 PTC non-lockup
9"
4.10 gears and spooled.
'73 Duster (3000# with me in it)
Caltracs
Calvert mono leafs
Calvert shocks front and rear
FirmFeel uppers and strut rods.
Thanks in advance.
Bill
408
12.5 CR (flat tops with valve reliefs)
Trick Flow CNC Ported with titanium retainers (I don't have the flow numbers but they are available online)
Solid Roller Cam - 660 lift, 258/264 duration at .050 108 LCA
HS roller rockers (1.5's)
Thumper 950ish carb on a Victor 340 and HVH 1" spacer
Hedman Huster headers with 1 7/8" primaries and 3.5 collector
727
Reverse Manual Valvebody
5800 PTC non-lockup
9"
4.10 gears and spooled.
'73 Duster (3000# with me in it)
Caltracs
Calvert mono leafs
Calvert shocks front and rear
FirmFeel uppers and strut rods.
Thanks in advance.
Bill