LA 360 drop in roller lifters

[512Stroker]

Had a head cold the last few days, finally had a chance to tonight.

200psi cranking w/ the cam @ 110 installed.

It would have been interesting to see what the cylinder pressure would have been if installed at 106*

 

[TurboGLH]

200 psi Boy Howdy that is getting right with it.
I think I have your cold - thanks.

I had calculated it at about 180psi, but you know calculations vs the real world in stuff like this.

Motor has good quench, closed chambers and I can get 93 octane anywhere around here. I'm not worried, but wouldn't have minded it a bit lower.

I hear it's going around. Thought it was seasonal allergies, but I've been all stuffed up for the last three days.

It would have been interesting to see what the cylinder pressure would have been if installed at 106*

106 has an earlier intake closing event, 47 vs 51deg, it would have increased it vs the 110. I rolled it back to 110 for just this reason, it was looking a little too hot with these lobes at 106. Glad I did.

 

[rumblefish360]

I had calculated it at about 180psi, but you know calculations vs the real world in stuff like this.

Tell it brother! Some people just don’t get that.